2 handsets in the same radio cell can have a
conference call with an outside party.
1During an outside call, press MMenuN to
put the call on hold.
2MbN: “Intercom” a MOKN
3MbN: Select the desired unit. a MOKN
4Wait for the paged party to answer.
RIf the paged party does not answer,
press MBackN to return to the outside
call.
5To complete the transfer:
Press MN.
To establish a conference call:
MMenuN a MbN: “Conference” a MOKN
RTo leave the conference, press
MN. The other 2 parties can
continue the conversation.
RTo put the outside call on hold:
MMenuN a MbN: “Hold” a MOKN
To resume the conference: MMenuN
a MbN: “Conference” a MOKN
RTo cancel the conference: MMenuN a
MbN: “Stop Conference” a MOKN
You can continue the conversation
with the outside caller.
Note:
RYou can also select your smartphone in this
feature using a handset, if your smartphone
is registered to the base unit (page 40).
Intercom
Intercom calls can be made between handsets
in the same radio cell.
Note:
RWhen paging the handset, the paged
handset beeps for 1 minute.
RIf you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press MN, then press
MN.
RYou can also select your smartphone in this
feature using a handset, if your smartphone
is registered to the base unit (page 40).
Making an intercom call
1MMenuN (right soft key) a MIntercomN
2MbN: Select the desired unit. a MOKN
3When you finish talking, press MN.
Answering an intercom call
1Press MN to answer the page.
2When you finish talking, press M N.
Turning auto intercom on/off
This feature allows the handset to answer
intercom calls automatically when it is called.
You do not need to press MN. When this
feature is set to “On”, the monitoring handset
for the baby monitor feature (page 31) will
also answer baby monitor calls automatically.
The default setting is “Off”.
1MMenuN (right soft key) #273
2MbN: Select the desired setting. a MOKN
a MN
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press MMenuN (right soft
key) for about 3 seconds.
RTo turn key lock off, press MKey lockN (right
soft key) for about 3 seconds.
Note:
RCalls to emergency numbers cannot be
made until key lock is turned off.
17
Making/Answering Calls
PRW110FX(en)_0724_ver012.pdf 17 2013/07/24 13:40:25