Panasonic KX-PRW110FX operating instructions Setting up SMS, Sending a message, Turning SMS on/off

SMS (Short Message Service)

Setting up SMS

SMS allows you to send and receive text messages.

Important:

RTo use SMS features, you must:

–subscribe to a Caller ID and/or an appropriate service such as SMS.

–confirm that SMS is turned on.

–confirm that the correct message centre numbers are stored.

Contact your service provider/telephone company for details and availability.

Note:

RA total of 22 messages (at 160 characters/ message) can be saved. Total number may be more than 22 if length of messages is less than 160 characters/message.

RIf the unit is connected to a PBX system, you may not be able to use SMS features.

Turning SMS on/off

1MMenuN (right soft key) #357

2MbN: Select the desired setting. a MOKN

a MN

Storing SMS message centre numbers

SMS message centre numbers must be stored in order to send and receive SMS messages.

For Czech:

The message centre numbers (used for SMS services provided by Telefonica O2) are preprogrammed in this unit. You can change them if necessary.

For Slovakia:

The message centre numbers (used for SMS service provided by Slovak Telecom - T-Com) are preprogrammed in this unit. You can change them if necessary.

RContact your service provider/telephone company for more information.

RIf you change the unit’s region setting/reset the base unit, the stored message centre numbers will be deleted or changed

(page 22). In this case, store the numbers again if necessary.

1To store “Message Centre1”: MMenuN (right soft key) #351

To store “Message Centre2”: MMenuN (right soft key) #352

2Edit the number as necessary. a MOKN

a MN

Note:

RFor PBX users:

–You need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 number.

–If you only use the Message Centre 1 number for SMS, store the Message Centre 1 number as is (without adding a line access number or dialling pause) to Message Centre 2.

Sending a message

Writing and sending a new message

1MMenuN (right soft key) a a MOKN

2 MbN: “Create” a MOKN

3Enter a message. a MOKN

R You can change the character entry mode by pressing MR/ECON (page 43).

4Enter the destination phone number (20 digits max.). a MOKN 2 times

R You can also set the phone number:

–from the redial list by pressing MTN.

–from the caller list by pressing MN.

–from the phonebook by pressing MWN.

5To save the message, select “Yes”. a

MOKN

6To send the message, press MOKN.

Note:

RThis unit supports SMS messages of up to 612 characters, however, the maximum number of characters you can send or

37

PRW110FX(en)_0724_ver012.pdf 37

2013/07/24 13:40:27