Onkyo HT-RC180 Component Video Setup, First Time Setup—Continued, The “Input/Output Assign” menu

First Time Setup—Continued

Component Video Setup

If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD/BD player to COMPONENT VIDEO IN 2, you should assign it to the DVD/BD input selector.

Input selector	Default assignment
DVD/BD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -
TV/TAPE	- - - - -
TUNER	- - - - - (Fixed)
CD	- - - - -
PHONO	- - - - -
PORT	- - - - -
(TX-NR807)

If you’ve connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video and S-Video sources are upconverted* and output by the COMPONENT VIDEO MONITOR OUT*1. You can set this for each input selector by selecting the “- - - - -” option.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

*1 Only when “Monitor Out” setting is set to “Analog”.

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2	Use the Up and Down [q]/[w] but-
	tons to select “1. Input/Output
	Assign”, and then press
	[ENTER].
	The “Input/Output Assign” menu
	appears.
		1. Input/Output Assign
	1.	Monitor Out
	2.	HDMI Input
	3.	Component Video Input
	4.	Digital Audio Input

3 Use the Up and Down [q]/[w] but- tons to select “3. Component Video Input”, and then press [ENTER].

The “Component Video Input” menu

appears.
1–3.	Component Video Input
DVD/BD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -

4	Use the Up and Down [q]/[w] but-
	tons to select an input selector,
	and then use the Left and Right
	[e]/[r] buttons to select:
	IN1: Select if the video component
	is connected to COMPO-
	NENT VIDEO IN 1.
	IN2: Select if the video component
	is connected to COMPO-
	NENT VIDEO IN 2.
	- - - - -:Select if you are using the
	HDMI OUT, rather than the
	COMPONENT VIDEO
	OUT, for the output from
	composite video, S-Video,
	and component video
5	sources.
	Press the [SETUP] button.
	The setup menu closes.

Notes:

•(TX-NR807)For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT, the “Monitor Out” setting must be set to “Analog” (see page 46), and the “Component Video Input” setting must be set to “- - - - -”. See page 27 for more information on video signal flow and upconversion.

•(TX-NR807)If not connected to HDMI OUT, the “Monitor Out” setting will be automatically switched to “Analog” (see page 28).

•If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

49