Onkyo 29400021 Using Zone 2/3, Controlling Zone 2/3 from the AV receiver, Multi Zone—Continued

Multi Zone—Continued

Using Zone 2/3

This section explains how to turn Zone 2/3 on and off, how to select an input source for Zone 2/3, and how to adjust the volume for Zone 2/3.

Controlling Zone 2/3 from the AV receiver

ZONE 3 indicator

ZONE 2 indicator

ZONE 3		Input selector buttons
ZONE 2	OFF

1	To turn on Zone 2/3 and select an
	input source, press the [ZONE 2]
	or [ZONE 3] button followed by
	an input selector button within 8
	seconds.
	Zone 2/3 turns on, the ZONE 2/3 indi-
	cator lights up.
	Tip (TX-NR807):
	The 12V TRIGGER OUT ZONE 2/3
	goes high (+12 V).
	To select AM or FM press the
	[TUNER] input selector and the
	[ZONE 2] or [ZONE 3] button repeat-
	edly. You can also select SIRIUS
	(TX-NR807: North American mod-
	els).
	To select the same source as that of the
	main room, press the [ZONE 2] or
	[ZONE 3] button twice. “Zone 2 Selec-
	tor: Source” or “Zone 3 Selector:
2	Source” appears on the display.
	To turn off Zone 2/3, press the
	[ZONE 2] or [ZONE 3] button.
	The ZONE 2 or ZONE 3 indicator
	flashes.
	Press the [OFF] button.
	The zone is turned off, and the ZONE 2
	or ZONE 3 indicator goes off.

Note:

(TX-NR807)When Zone 2/3 is turned off, the output from the 12V TRIGGER OUT ZONE 2/3 goes low (0 volts).

Controlling Zone 2/3 with the Remote Controller

STANDBY
ON	ZONE
INPUT
SELECTOR

Note:

To control Zone 2/3, you must press the remote control- ler’s [ZONE] button first.

The ZONE button turns red while Zone 2 is on, and green while Zone 3 is on.

1	Press the [ZONE] button
	repeatedly, then point the remote
	controller at the AV receiver and
	press the [ON] button.
	Tip (TX-NR807):
	The 12V TRIGGER OUT ZONE 2/3

goes high (+12 V).

2	To select an input source for
	Zone 2/3, press the [ZONE]
	button repeatedly, followed by an
	INPUT SELECTOR button.
	To select AM or FM press the
	[TUNER] INPUT SELECTOR and the
	[ZONE] button repeatedly. You can
	also select SIRIUS (TX-NR807:
	North American models).

3	To turn off Zone 2/3, press the
	[ZONE] button repeatedly,
	followed by the [STANDBY]
	button.

120