Onkyo TX-NR807, 29400021, HT-RC180 instruction manual Audio Adjust, Multiplex/Mono, Input Channel

Advanced Setup—Continued

Audio Adjust

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.

1	Press the [RECEIVER] button followed by
	the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make sure the
	appropriate external input is selected on your TV.
2	Use the Up and Down [q]/[w] buttons to
	select main menu, and then press
	[ENTER].
3	Use the Up and Down [q]/[w] buttons to
	select the submenu, and then press

[ENTER].

4	Use the Up and Down [q]/[w] buttons to
	select setting, and then use the Left and
	Right [e]/[r] buttons to set them.
5	When you’ve finished, press the [SETUP]
	button.

The setup menu closes.

Multiplex/Mono

Multiplex

Input Channel	Main: The main channel is output (default).
	Sub: The sub channel is output.
	Main/Sub: Both the main and sub channels are output.

This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Mono

Input Channel	Left/Right: Both the left and right channels are output (default).
	Left: Only the left channel is output.
	Right: Only the right channel is output.

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2-channel analog/PCM source in the Mono listening mode.

Output Speaker	Center:	Mono audio is output by the center speaker (default).
	Left/Right:	Mono audio is output by the front left and right speakers.

This setting determines which speakers output mono audio when the Mono listening mode is selected.

Note:

If the “Center” setting is set to “None” (page 85), this setting is fixed at “Left/Right”.

89