Onkyo TX-NR807, 29400021, HT-RC180 Through, Auto, 480p 480p/576p, 720p, 1080i, 1080p

First Time Setup—Continued

5 Use the Up and Down [q]/[w] but- tons to select “Resolution”, and use the Left and Right [e]/[r] buttons to select:

Through:

Select this to pass video through the AV receiver at the same resolution and with no conversion.

Auto* :

Select this to have the AV receiver automatically convert video at reso- lutions not supported by your TV.

480p (480p/576p):

Select this for 480p or 576p output and video conversion as necessary.

720p:

Select this for 720p output and video conversion as necessary.

1080i:

Select this for 1080i output and video conversion as necessary.

1080p* :

Select this for 1080p output and video conversion as necessary.

Tip:

The “Resolution” setting can also be set using the [VIDEO] button on the remote controller.

Note (TX-NR807):

Settings marked with an asterisk (* ) are not available when the “Monitor Out” setting is set to “Analog”.

6	Press the [SETUP] button.
	The setup menu closes.

Notes:

•See page 27 for charts showing how the “Monitor Out” and “Resolution” settings affect the video signal flow through the AV receiver.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

47