Onkyo 29400021, HT-RC180, TX-NR807 instruction manual Source Setup

Advanced Setup—Continued

Source Setup

This section explains items on the “Source Setup” menu. Items can be set individually for each input selector.

1	Press the input selector buttons to select
	an input source.
2	Press the [RECEIVER] button followed by
	the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make sure the
	appropriate external input is selected on your TV.
3	Use the Up and Down [q]/[w] buttons to

select “4. Source Setup”, and then press [ENTER].

The “Source Setup” menu appears. The name of the currently selected input selector is displayed.

Input selector

4. Source Setup DVD/BD

1.IntelliVolume

2.A/V Sync

3.Name Edit

4.Picture Adjust

For NET input source only “IntelliVolume” will be available.

4	Use the Up and Down [q]/[w] buttons to
	select an item, and then press [ENTER].
5	Use the Left and Right [e]/[r] buttons to
	change it.
	The “Source Setup” menu items are explained
	below.
6	When you’ve finished, press the [SETUP]
	button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its input selector buttons, [SETUP] button, arrow buttons, and [ENTER] button.

IntelliVolume

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others.

If a component is noticeably louder than the others, use the Left [e] button to reduce its input level. If it’s noticeably quieter, use the Right [r] button to increase its input level.

IntelliVolume −12 dB to +12 dB (default: 0 dB)

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal.

To view the TV picture while setting the delay, press [ENTER]. To return to the previous screen, press the [RETURN] button.

A/V Sync 0 ms to 250 ms in 5 ms steps (default: 0 ms)

If HDMI Lip Sync is enabled (see page 101), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the summation of the A/V Sync delay time and the HDMI Lip Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses.

Note:

A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an analog input source.

93