Onkyo 29400021, HT-RC180, TX-NR807 Turning On the AV receiver, Turning On and Standby

Turning On the AV receiver

(North American and			(European, Australian and
Taiwan models)			Asian models)			STANDBY
	ON/STANDBY			ON/STANDBY
						ON
		STANDBY indicator			STANDBY indicator

RECEIVER

POWER

Turning On and Standby

1	(European, Australian and Asian models)
	Set the [POWER] switch to the ON position (	).

The AV receiver enters Standby mode, and the STANDBY indicator comes on.

2

AV receiver	Remote
	controller

or

On the AV receiver, press the [ON/STANDBY] button.

On the remote controller, press the [RECEIVER] button, followed by the [ON] button.

The AV receiver comes on, the display lights up, and the STANDBY indicator goes off. Pressing the remote controller’s [ON] button again will turn on any components connected via u.

To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller’s [STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn it off.

European, Australian and Asian models: To completely shut down the AV receiver, set the [POWER] switch to the OFF position ().

Smooth Operation in a Few Easy Steps

To ensure smooth operation, here’s a few easy steps to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once.

■ Did you connect your TV to an HDMI OUT or COMPONENT VIDEO MONITOR OUT?

If you did, “Monitor Setup” (TX-NR807) on page 43.

■ Run MultEQ Room Correction and Speaker Setup—this is essential!

See “Audyssey MultEQ® Room Correction and Speaker Setup” on page 54.

■ Have you connected a component to an HDMI input,	HDMI
component video input, or digital audio input?

If you have, see “HDMI Input Setup” on page 48, “Component Video Setup” on page 49, or “Digital Audio Input Setup” on page 50 respectively.

■ Have you connected an Onkyo MD recorder, CD recorder, OUT IN

or RI Dock?

If you have, see “Changing the Input Display” on page 53.

TV/TAPEMD recorder, CD recorder,

RI Dock

42