Onkyo 29400021, HT-RC180, TX-NR807 Bi-amping the Front Speakers, Bi-amping Speaker Hookup

Connecting the AV receiver—Continued

Bi-amping the Front Speakers

The FRONT L/R and SURR BACK/ZONE 2 L/R termi- nal posts can be used with front speakers and surround back speakers respectively, or bi-amped to provide sepa- rate tweeter and woofer feeds for a pair of front speakers that support bi-amping, providing improved bass and treble performance.

•When bi-amping is used, the AV receiver is able to drive up to 5.1 speakers in the main room.

•For bi-amping, the FRONT L/R terminal posts con- nect to the front speakers’ woofer terminals. And the SURR BACK/ZONE 2 L/R terminal posts connect to the front speakers’ tweeter terminals.

•Once you’ve completed the bi-amping connections shown below and turned on the AV receiver, you must set the “Speakers Type(Front)” setting to “Bi-Amp” to enable biamping (see page 51).

Important:

•When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

•Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual.

Bi-amping Speaker Hookup

1	Connect the AV receiver’s FRONT R positive (+)
	terminal to the right speaker’s positive (+) Woofer
	(low) terminal. And connect the AV receiver’s
	FRONT R negative (–) terminal to the right
	speaker’s negative (–) Woofer (low) terminal.
2	Connect the AV receiver’s SURR BACK/ZONE 2
	R positive (+) terminal to the right speaker’s pos-
	itive (+) Tweeter (high) terminal. And connect the
	AV receiver’s SURR BACK/ZONE 2 R negative
	(–) terminal to the right speaker’s negative (–)
	Tweeter (high) terminal.
3	Connect the AV receiver’s FRONT L positive (+)
	terminal to the left speaker’s positive (+) Woofer
	(low) terminal. And connect the AV receiver’s
	FRONT L negative (–) terminal to the left
	speaker’s negative (–) Woofer (low) terminal.
4	Connect the AV receiver’s SURR BACK/ZONE 2

L positive (+) terminal to the left speaker’s posi- tive (+) Tweeter (high) terminal. And connect the AV receiver’s SURR BACK/ZONE 2 L negative

(–) terminal to the left speaker’s negative (–) Tweeter (high) terminal.

Tweeter (high) Tweeter (high)

Woofer (low)	Woofer (low)
Right speaker	Left speaker

21