Onkyo HT-RC180 First Time Setup, Monitor Setup TX-NR807, The current setting is displayed, Tips

First Time Setup

This section explains the settings that you need to make before using the AV receiver for the very first time.

	■ Change “Monitor Out” setting manually
Monitor Setup (TX-NR807)

If you connect your TV to the HDMI OUT, “Monitor Out” setting is automatically set to “HDMI” so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted* and output by the HDMI OUT. The onscreen setup menus are displayed on the HDMI OUT only.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI OUT, as well as whether to have the onscreen setup menu output through the HDMI OUT or through an analog output.

If you connect your TV to the COMPONENT VIDEO MONITOR OUT (not the HDMI OUT), “Monitor Out” setting is automatically set to “Analog” so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output by the COMPONENT VIDEO MONITOR OUT.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

MONITOR OUT

1	Press the [MONITOR OUT] but-
	ton.
	The current setting is displayed.

2	Press the [MONITOR OUT] button
	repeatedly to select:
	Analog: Select this if your TV is con-
	nected to the COMPONENT
	VIDEO MONITOR OUT, S
	MONITOR OUT, or V MON-
	ITOR OUT.
	HDMI: Select this if your TV is con-
	nected to the HDMI OUT.
	Note:
	When “HDMI” is selected, the
	onscreen setup menus are output by
	only the HDMI OUT. If you’re not
	using the HDMI OUT and select
	“HDMI” by mistake and the menus
	disappear, press the [MONITOR
	OUT] button to select “Analog”.

Tips:

•The “Monitor Out” setting can also be set using the [VIDEO] button on the remote controller.

•This setting can also be performed by using Onscreen Setup Menu (see page 46).

Notes:

•See page 27 for charts showing how the “Monitor Out” and “Resolution” (see page 46) settings affect the video signal flow through the AV receiver.

•You can specify the output resolution for the HDMI OUT and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV (see page 46).

43