Onkyo TX-NR807, 29400021 p q r s t u v w x y z A, Front & Rear Panels—Continued, abcdef g

Front & Rear Panels—Continued

jAudyssey indicator (54, 87)

Flashes during Audyssey MultEQ® Room Correc- tion and Speaker Setup. Lights up when the “Equal- izer Settings” is set to “Audyssey” or

Audyssey Dynamic Surround Expansion™ listen- ing mode is selected.

Dynamic EQ indicator (91):

“Dynamic EQ” lights when “Dynamic EQ” is enable.

Dynamic Volume indicator (91):

“Vol” lights when “Dynamic Volume” is enable.

kMessage area

Displays various information.

lAudio input indicators

Indicate the type of audio input that’s selected as the audio source: HDMI, ANALOG, or DIGITAL.

mVolume level (60)

Displays the volume level.

nMUTING indicator (62)

Flashes while the AV receiver is muted.

Rear Panel

(TX-NR807)	* North American models
abcdef g*		h i j k l m n o

p q r s t u v w x y z A

aDIGITAL OPTICAL IN 1 and 2

These optical digital audio inputs are for connecting components with optical digital audio outputs, such as CD and DVD/BD players. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 50.

bDIGITAL COAXIAL IN 1, 2, and 3

These coaxial digital audio inputs are for connect- ing components with coaxial digital audio outputs, such as CD and DVD/BD players. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 50.

cu REMOTE CONTROL

This u(Remote Interactive) jack can be con- nected to an ujack on another Onkyo AV compo- nent. The AV receiver’s remote controller can then be used to control that component. To use u, you must make an analog audio connection (RCA) between the AV receiver and the other AV compo- nent, even if they are connected digitally.

dRS232 (TX-NR807)

Terminal for control.

eUNIVERSAL PORT

This port is for connecting the component with the Universal Port connector such as UP-A1 series Dock.

fETHERNET

This port is for connecting the AV receiver to your Ethernet network (e.g., router or switch) for playing music files on a networked computer or media server, or for listening to Internet radio.

11