Onkyo TX-NR807 Setting the Display Brightness, Muting the AV Receiver, Using the Sleep Timer

Basic Operations—Continued

Setting the Display Brightness

You can adjust the brightness of the AV receiver’s dis- play.

Remote	Press the [RECEIVER] button,
controller	and then press the [DIMMER]
	button repeatedly to select:

• Normal + VOLUME light on.

• Normal + VOLUME light off.

• Dim + VOLUME light off.

• Dimmer + VOLUME light off. Alternatively, you can use the AV receiver’s [DIMMER] button (North

American and Taiwan models).

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.

Remote	Press the [RECEIVER] button,
controller	and then press the [MUTING] but-
	ton.

The output is muted and the MUTING indicator flashes on the display, as shown.

To unmute the AV receiver, press the [MUTING] button again, or adjust the volume.

The Mute function is cancelled when the AV receiver is set to Standby.

Tip:

You can specify how much the output is muted with the “Muting Level” setting (page 98).

Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn off automatically after a specified period.

Remote	Press the [RECEIVER] button,
controller	and then press the [SLEEP] but-
	ton repeatedly to select the
	required sleep time.

The sleep time can be set from 90 to 10 minutes in 10 minute steps.

The SLEEP indicator appears on the display when the sleep timer has been set. The specified sleep time appears on the display for about five seconds, then the previous display reappears.

If you need to cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.

To check the time remaining until the AV receiver sleeps, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

62