Onkyo HT-RC180 UP-A1 series Dock for iPod, About the UP-A1 series Dock, Compatible iPod models

UP-A1 series Dock for iPod

About the UP-A1 series Dock

With the UP-A1 series Dock (sold separately), you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great sound. You can use the AV receiver’s remote controller to operate your iPod.

For the latest information on the Dock, see the Onkyo Web site at: http://www.onkyo.com

iPod adapter

Dock connector

Compatible iPod models

For information about which iPod models are sup- ported by the UP-A1 series Dock, see the UP-A1 series Dock instruction manual.

Note:

Before using the UP-A1 series Dock, update your iPod with the latest software, available from the Apple Web site.

Function Overview

■Basic Operation

Note:

The AV receiver may take several seconds to startup, so you might not hear the first few seconds of the first song.

• Auto Power On Function

If you start iPod playback while the AV receiver is on Standby, the AV receiver will automatically turn on and select your iPod as the input source.

• Direct Change Function

If you start iPod playback while listening to another input source, the AV receiver will automatically select your iPod as the input source.

• Using the AV receiver's Remote Controller

You can use the AV receiver’s remote controller to control basic iPod functions.

Operating Notes:

•Before selecting a different input source, stop iPod playback to prevent the AV receiver from selecting the iPod input source by mistake.

•If any accessories are connected to your iPod, the AV receiver may not be able to select the input source properly.

•While your iPod is in the UP-A1 series Dock, its vol- ume control has no effect. If you adjust your iPod models volume control while it’s in the UP-A1 series Dock, make sure it’s not set too high before you recon- nect your headphones.

•The Auto Power On function will not work if you set your iPod in the UP-A1 series Dock while it is play- ing.

•When Zone 2 or 3 is turned on, you can’t use Auto Power On and Direct Change functions.

■Using Your iPod models Alarm Clock

You can use your iPod models Alarm Clock function to automatically turn on your iPod and the AV receiver at a specified time. The AV receiver’s input source will auto- matically be set to the [PORT] selector.

Notes:

•To use this function, your iPod must be in the UP-A1 series Dock, and the UP-A1 series Dock must be con- nected to the AV receiver.

•When you use this function, be sure to set the AV receiver’s volume control to a suitable level.

•The AV receiver may take several seconds to startup, so you might not hear the first few seconds of the first song.

•When Zone 2 or 3 is turned on, you can’t use this func- tion.

■Charging Your iPod models Battery

The UP-A1 series Dock charges your iPod models bat- tery while your iPod is in the UP-A1 series Dock and connected to the UNIVERSAL PORT jacks on the AV receiver. While your iPod is seated in the UP-A1 series Dock, its battery will be charged when the AV receiver is set to “On” or “Standby”.

Note:

When UP-A1 series Dock that seated iPod is connected, the power consumption on standby mode slightly increases.

70