Onkyo HT-RC180, 29400021 Using Easy Macros, Press the MY MOVIE, MY TV, Or MY Music button

Basic Operations—Continued

Using Easy Macros

Using the Easy macro command in the Easy macro mode, you can sequentially operate Onkyo components with simple commands by simply pressing one button. These commands are user-specifiable (see page 134) and the default actions are described below. Press the ACTIVITIES buttons to start the Easy macro command. Once the AV receiver has entered the normal macro mode, all of the ACTIVITIES buttons will automatically switch to the normal macro mode. In this case, pressing the [ALL OFF] button will set only the AV receiver to Standby mode.

ACTIVITIES

buttons

ALL OFF,

MY MOVIE,

MY TV,

MY MUSIC

RECEIVER

AUDIO

1	Press the [MY MOVIE], [MY TV],
	or [MY MUSIC] button.
	MY MOVIE (default):
	1. The TV connected to the AV
	receiver is turned on.

2.The Onkyo DVD player con- nected to the AV receiver is turned on.

3.The AV receiver is turned on.

4.The input selector of the AV receiver is set to “DVD/BD”.

5.The player starts playback. *1

MY TV (default):

1.The TV connected to the AV receiver is turned on.

2.The cable set-top box connected to the AV receiver is turned on.

3.The AV receiver is turned on.

4.The input selector of the AV receiver is set to “CBL/SAT”. You can enjoy cable TV.

MY MUSIC (default):

1.The Onkyo CD player connected to the AV receiver is turned on.

2.The AV receiver is turned on.

3.The input selector of the AV receiver is set to “CD”.

4.The player starts playback.

Note:

Once you start the Easy macro com- mand, you cannot use other ACTIVI- TIES buttons during the execution. If you want to operate other components halfway, press the [ALL OFF] to stop and press desired ACTIVITIES button.

2	Press the [ALL OFF] button.
	1.	The connected component stops
		and turns off.
	2.	The AV receiver turns off.
	3.	The TV connected to the AV
		receiver turns off (Standby). *2*3

*1. Depending on the start-up time of the DVD/BD player, the AV receiver may not activate this playback command. In this case, press the Play [1] button on the remote controller.

*2. When [MY MUSIC] is selected, with the default settings, this will not be performed.

*3. With some televisions, the power may not be turned off (or enter standby).

64