Onkyo 29400021 Connecting a TV or Projector, C B a, Connecting the AV receiver—Continued, Hint

Connecting the AV receiver—Continued

Connecting a TV or Projector

See “Connecting Components with HDMI” on page 25 for HDMI connection information.

Step 1: Video Connection

Choose a video connection that matches your TV ( A , B , or C ), and then make the connection.

Step 2: Audio Connection

Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from your TV or listen in Zone 2 or Zone 3.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 or Zone 3 as well, use and , or and .)

Connection		AV receiver	Signal flow	TV, projector, etc.
	A	COMPONENT VIDEO MONITOR OUT	⇒	Component video input
		MONITOR OUT S	⇒	S-Video input
	C	MONITOR OUT V	⇒	Composite video input
		TV/TAPE IN L/R	⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 2 (VCR/DVR)	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 1 (GAME)	⇐	Digital optical output

b

c

C

B

a

A

	L		R
COAXIAL	OPTICAL	AUDIO	S VIDEO	VIDEO	Y	PB	PR
OUT	OUT	OUT	IN	IN	COMPONENT VIDEO IN

TV, projector,

etc.

When you use connection or , you need to assign the digital audio input (see page 50).

Hint!

If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 32 and 34).

30