Onkyo 29400021 Video Input Setup, HDMI Input Setup, First Time Setup—Continued, appears, Notes

First Time Setup—Continued

Video Input Setup		4	Use the Up and Down [q]/[w] but-
			tons to select an input selector,
HDMI Input Setup			and use the Left and Right [e]/
			[r] buttons to select:
If you connect a video component to HDMI IN, you
			HDMI1, HDMI2, HDMI3, HDMI4,
must assign that input to an input selector. For example,
			HDMI5, HDMI6 (TX-NR807):
if you connect your DVD/BD player to HDMI IN 1, you
			Select the HDMI IN to which
must assign HDMI IN 1 to the DVD/BD input selector.
			the video component has
If you’ve connected your TV to the AV receiver with an
			been connected.
HDMI cable, you can set the AV receiver so that
			- - - - -:Output composite video,
composite video, S-Video, and component video sources			S-Video, and component
are upconverted* and output by the HDMI OUT*1. You			video sources from the HDMI
can set this for each input selector by selecting the			OUT. The video output signal
“- - - - -” option.			from the HDMI OUT is the
Composite video, S-Video,			one configured in “Compo-
			nent Video Setup” (see
component video	HDMI
			page 49).
IN
			Each HDMI IN cannot be assigned to
			more than one input selector. When
			HDMI IN have already been assigned,
OUT			you must set first any unused input
			selectors to “- - - - -” or you will be
Composite video, S-Video,	HDMI

component video	unable to assign HDMI IN to input
	selector.

*1 (TX-NR807)This applies only when “Monitor Out” setting is set to “HDMI”.

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [ENTER].

The “Input/Output Assign” menu

	appears.
		1. Input/Output Assign
	1.	Monitor Out
	2.	HDMI Input
	3.	Component Video Input
	4.	Digital Audio Input
3	Use the Up and Down [q]/[w] but-
	tons to select “2. HDMI Input”,
	and then press [ENTER].

The “HDMI Input” menu appears.

1–2.	HDMI Input
DVD/BD	HDMI1
VCR/DVR	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
AUX	- - - - -
48

5	Press the [SETUP] button.
	The setup menu closes.

Notes:

•If no video component is connected to HDMI OUT (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of Component Video Input.

•When an HDMI IN is assigned to an input selector, the AV receiver will select audio from HDMI IN as a pri- ority.

See “Digital Audio Input Setup” on page 50.

•The TUNER input selector cannot be assigned and is fixed at the “- - - - -” option.

•If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•Do not assign the component connected with the HDMI input to the TV/TAPE selector when you set “TV Control” setting to “On” (see page 102). Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.