Manuals / Onkyo / Home Audio / Stereo Receiver

Onkyo 29400021 Specifications TX-NR807, Amplifier Section, Video Section, Tuner Section, General

Models: TX-NR807 HT-RC180 29400021

1 148

Download 148 pages 17.31 Kb

Page 144

Specifications (TX-NR807)

Specifications (TX-NR807)

Amplifier Section

Rated Output Power
All channels:	North American and Taiwan:
	135 watts minimum continuous
	power per channel, 8 ohm loads, 2
	channels driven from 20 Hz to 20
	kHz, with a maximum total
	harmonic distortion of 0.08% (FTC)
	145 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.7% (FTC)
	160 watts minimum continuous power
	per channel, 6 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.1% (FTC)
	European, Australian and Asian:
	7 ch ⋅ 180 W at 6 ohms, 1 kHz, 1 ch
	driven (IEC)
Maximum Output Power	7 ch ⋅ 230 W at 6 ohms, 1 kHz, 1 ch
	7 ch ⋅ 230 W at 6 ohms, 1 kHz, 1 ch
	driven (JEITA)
Dynamic Power	300 W (3 Ω, Front)
	250 W (4 Ω, Front)
	150 W (8 Ω, Front)
THD (Total Harmonic Distortion)
	0.08%
Damping Factor	60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance

200 mV/47 kΩ (LINE)

2.5mV/47 kΩ, (PHONO MM)

Output Level and Impedance

	200 mV/470 Ω (REC OUT)
Phono Overload	70 mV (MM 1 kHz 0.5%)
Frequency Response	5 Hz - 100 kHz/+1 dB - 3 dB (LINE)
Tone Control	±10 dB, 50 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio	110 dB (LINE, IHF-A)
	80 dB (PHONO, IHF-A)
Speaker Impedance	4 Ω - 16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

1Vp-p/75 Ω (Component and S-Video Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 0.28 Vp-p/75 Ω (S-Video C)

1Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 100 MHz - 3 dB

Tuner Section

FM Tuning Frequency Range

	North American and Taiwan:
	87.5 MHz - 107.9 MHz
	Others: 87.5 MHz - 108.0 MHz, RDS
AM Tuning Frequency Range
	North American and Taiwan:
	530 kHz - 1710 kHz
	Others: 522 kHz - 1611 kHz
Preset Channel	40

Digital Tuner (North American models only):

SIRIUS

General

Power Supply	North American and Taiwan:
	AC 120 V, 60 Hz
	Others: AC 220 - 240 V, 50/60 Hz
Power Consumption	North American and Taiwan: 8.1 A
	Others: 750 W
Dimensions (W ⋅ H ⋅ D)
	435 ⋅ 198.5 ⋅ 435.5 mm
	17-1/8" ⋅ 7-13/16" ⋅ 17-1/8"
Weight	18.0 kg (39.7 lbs.)

■Video Inputs

HDMI	IN 1, IN 2, IN 3, IN 4, IN 5, IN6
Component	IN 1, IN 2
S-Video	DVD/BD, VCR/DVR, CBL/SAT,
	GAME
Composite	DVD/BD, VCR/DVR, CBL/SAT,
	GAME, AUX(Front)

■Video Outputs

HDMI	OUT
Component	MONITOR OUT
S-Video	MONITOR OUT, VCR/DVR OUT
Composite	MONITOR OUT, VCR/DVR OUT

■Audio Inputs

Digital Inputs	Optical: 2 (Rear), 1 (Front)
	Coaxial: 3 (Rear)
Analog Inputs	DVD/BD, VCR/DVR, CBL/SAT,
	GAME, AUX(Front), TV/TAPE, CD,
	PHONO

■Audio Outputs

Analog Outputs	TV/TAPE, VCR/DVR, PRE OUT,
	ZONE2 PRE OUT, ZONE3 PRE OUT
Multichannel Pre Outputs
	7
Subwoofer Pre Outputs	2
Speaker Outputs	Main (L, R, C, SL, SR, SBL, SBR, LH,
	RH, LW, RW)
	+ ZONE2 (L, R) / ZONE3 (L, R)
Phones	1

■Control Terminal

MIC	Yes
RS232	1
Ethernet	1
IR Input	1
IR Output	1
12 V Trigger Out	ZONE2 / ZONE3

Specifications and features are subject to change without notice.

144

Image 144

Onkyo 29400021, HT-RC180 Specifications TX-NR807, Amplifier Section, Video Section, Tuner Section, General, All channels

Contents

Contents TX-NR807 HT-RC180AV Receiver Important Safety Instructions AVISPrecautions For U.S. modelsFor Canadian Models Modèle pour les CanadienSupplied Accessories Precautions—ContinuedFor British models For European ModelsContents Turning On & First Time SetupUsing the Listening Modes Advanced SetupFeatures AmplifierProcessing ConnectionsFeatures-Continued THX Select2 PlusFront & Rear Panels bcde fFront Panel Front & Rear Panels-Continued l mn o p qrs t uv wa bc d e f gkl m n Displayp q r s t u v w x y z A Rear PanelFront & Rear Panels—Continued abcdef gFront & Rear Panels—Continued gSIRIUS antenna TX-NR807:North American modelsSee “Connecting Zone 2” on page Front & Rear Panels—ContinuedRemote Controller Installing the BatteriesAiming the Remote Controller NotesRemote Controller—Continued 1 2 3 Remote Controller—ContinuedControlling the tuner Arrow q/w buttonsAbout Home Theater Enjoying Home TheaterConnecting the AV receiver Connecting Your SpeakersSpeaker Configuration Connecting a Powered SubwooferConnecting the AV receiver—Continued Using Dipole SpeakersSpeaker Connection Precautions Connecting the Speaker Cables Connecting the AV receiver—Continuedtwist the bare wires 3 Fully insert the bare wiresBi-ampingthe Front Speakers Bi-ampingSpeaker HookupConnecting the AV receiver—Continued Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Connecting the AV receiver—ContinuedConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaConnecting the AV receiver—Continued Using a TV/FM Antenna SplitterAbout AV Connections Optical Digital JacksAV Connection Color Coding AV Cables & JacksConnecting Components with HDMI About HDMISupported Audio Formats About Copyright ProtectionMaking HDMI Connections Connecting the AV receiver—ContinuedVideo Signals Audio SignalsConnecting Both Audio & Video Which Connections Should I Use?Video Connection Formats TX-NR807 Connecting the AV receiver—ContinuedConnecting the AV receiver-Continued “Monitor Out” Setting Set to “Analog”Video Signal Flow and the Resolution Setting Video Connection Formats HT-RC180 Audio Connection FormatsConnecting the AV receiver-Continued Video Signal Flow ChartConnecting a TV or Projector C B aConnecting the AV receiver—Continued HintConnecting a DVD Player A C BConnecting the AV receiver—Continued Connecting a VCR or DVD Recorder for Playback Connecting the AV receiver—ContinuedHint Connecting a VCR or DVD Recorder for Recording Connecting the AV receiver—ContinuedNotes Connecting the AV receiver—Continued HintConnecting a Game Console Connecting the AV receiver—ContinuedGame Console Connecting a Camcorder or Other Device Connecting the AV receiver—ContinuedSignal flow ConnectionConnecting a CD Player or Turntable Connecting the AV receiver—ContinuedStep Turntable MM with no Phono Preamp Built-inConnecting the AV receiver-Continued Cassette, CDR, MD, or DAT recorderConnecting a Power Amplifier Connecting the AV receiver—ContinuedPower amplifier Powered subwooferConnecting an RI Dock Connecting the AV receiver-ContinuedIf Your iPod Supports Video If Your iPod Doesn’t Support VideoConnecting Onkyo u Components Connecting the Power CordConnecting the AV receiver—Continued NotesTurning On the AV receiver Turning On and StandbySmooth Operation in a Few Easy Steps First Time Setup Monitor Setup TX-NR807The current setting is displayed When “HDMI” is selected, theFirst Time Setup—Continued The “OSD Setup” menu appearsThe setup menu closes The main menu appears onscreenUsing the Onscreen Setup Menus Using the Display to change the settingsOnscreen Setup Menus and Display First Time Setup—ContinuedMonitor Out Setup First Time Setup—ContinuedThe “Input/Output Assign” menu appearsFirst Time Setup—Continued The setup menu closesThrough AutoVideo Input Setup HDMI Input SetupFirst Time Setup—Continued The setup menu closesComponent Video Setup First Time Setup—ContinuedThe “Input/Output Assign” menu appearsDigital Audio Input Setup First Time Setup-ContinuedThe setup menu closes appearsSpeaker Settings Powered Zone 2/3First Time Setup—Continued The “Speaker Settings” menu appearsFM/AM Frequency Step Setup First Time Setup—ContinuedThe “OSD Setup” menu appears The setup menu closesChanging the Input Display First Time Setup—ContinuedThe “Tuner” menu appears 200kHz/10kHzAudyssey MultEQ Room Correction and Speaker Setup Measurement PositionsFirst Time Setup—Continued About Audyssey Dynamic VolumeUsing Audyssey MultEQ First Time Setup—ContinuedWhen you’ve finished, press the ENTER button Turn on the AV receiver and the connected TVFirst Time Setup—Continued Press ENTERNext FinishCalculateError Messages 9 10 11First Time Setup—Continued CancelFirst Time Setup—Continued MultEQ: Auto Setup Speaker Detect ErrorChanging the Speaker Settings Manually Using a Powered SubwooferFirst Time Setup—Continued Speaker Matching ErrorBasic Operations Selecting the Input SourceAdjusting the Bass & Treble Basic Operations—ContinuedDisplaying Source Information Setting the Display Brightness Using the Sleep TimerMuting the AV Receiver Basic Operations—ContinuedUsing Headphones Selecting Speaker LayoutBasic Operations—Continued FrontHighUsing Easy Macros MY MOVIE defaultMY TV default MY MUSIC defaultSwitching Normal Macro Mode Restore DefaultChanging Source Component Basic Operations—ContinuedUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting AM/FM Stations Selecting PresetsDeleting Presets Listening to the Radio-ContinuedUsing RDS European models RDS Program Types PTYListening to the Radio—Continued NotesDisplaying Radio Text RT Listening to Traffic News TPFinding Stations by Type PTY Listening to the Radio—ContinuedUP-A1series Dock for iPod About the UP-A1series DockCompatible iPod models Function OverviewUP-A1series Dock for iPod-Continued Status messages UP-A1series Dock for iPod—ContinuedPORT Reading PORT Not SupportRecording 1 2 3Recording Separate AV Sources AV RecordingUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverUsing the Listening Modes—Continued Listening Modes Available for Each Source FormatMono/Multiplex Sources NotesStereo Source 1/2 Using the Listening Modes—ContinuedStereo Source 2/2 Using the Listening Modes—ContinuedNotes 5.1 channel Sources 1/2 Using the Listening Modes—Continued5.1 channel Sources 2/2 Using the Listening Modes—Continued7.1 channel Sources Using the Listening Modes—ContinuedAbout the Listening Modes Using the Listening Modes—ContinuedNotes Using the Listening Modes—Continued 5.1-channelsource + Dolby EXOnkyo Original DSP Modes Using the Listening Modes—ContinuedAdvanced Setup Onscreen Setup MenusAdvanced Setup—Continued Speaker SetupYes: Select if a subwoofer is connected default The main menu appears onscreenAdvanced Setup—Continued 80HzTHX default, 90Hz, 100Hz, 120HzOn: Double Bass function on default DoubleBass*8Advanced Setup—Continued continue with this procedureNotes NotesAdvanced Setup—Continued Preserve THX SettingsSurrBack Sp Spacing < 1ft < 0.3m 1 ft – 4 ft 0.3 m – 1.2 mAudio Adjust Advanced Setup—ContinuedMain: The main channel is output default The main menu appears onscreenAdvanced Setup—Continued Off: Panorama function off defaultDimension PanoramaAdvanced Setup—Continued Dynamic Volume see pageDynamic EQ On: Audyssey Dynamic EQ onAdvanced Setup—Continued Theater-DimensionalListening Angle LFE LevelSource Setup Advanced Setup—ContinuedThe “Source Setup” menu items are explained IntelliVolumeAdvanced Setup—Continued Name EditTo correct a character Advanced Setup-Continued Game Mode off defaultNormal Full Zoom Wide Zoom Auto: default Game ModeAdvanced Setup—Continued Adjust ModeDoes not process in either “3:2” or “2:2” default Edge Enhancement 0 default to +10Assigning Listening Modes to Input Sources Advanced Setup—ContinuedNotes Miscellaneous Volume/OSD Setup Advanced Setup—ContinuedVolume Display Maximum Volume Off, 50 to 99 Absolute displayHardware Setup Advanced Setup—ContinuedBottom: Bottom of the screen default Immediate DisplayAdvanced Setup—Continued Changing the Remote Controller’s IDSee “Setting the Multi Zone” on page Off: HDMI audio is not output to TV defaultAdvanced Setup—Continued Enable: HDMI Lip Sync enabledEnable “x.v.Color” enabled enabledAdvanced Setup-Continued Power ControlOn: Power Control enabled Off: Power Control disabledLock Setup Digital Input Signal FormatsAdvanced Setup-Continued Auto defaultUsing the Audio Settings Advanced Setup—ContinuedThe audio setting items appear onscreen BassAdvanced Setup—Continued –15.0dB to +12.0 dB default: 0.0 dB–12.0dB to +12.0 dB default: 0.0 dB Note HT-RC180Advanced Setup-Continued Audio SelectorA/V Sync Connecting the AV Receiver About NETNetwork Requirements NotesNET—Continued Listening to Internet RadioPlaying Music Files on a Server NET—ContinuedSearch NotesWindows Media Player 11 Setup configurationNET—Continued Random PlaybackSupported Audio File Formats NET—ContinuedWMA Lossless FLACServer Requirements About DLNANET—Continued Operating systemNetwork Settings When modifying network settingsThe setup menu closes NET—ContinuedMac Address DHCPIP Address Subnet MaskMulti Zone Multiroom CapabilityMain Room Zone 2 RoomConnecting Zone Connecting Your Zone 2 Speakers to an Amp in ZoneMulti Zone-Continued Zone 2 12V Trigger TX-NR807Connecting Your Zone 3 Speakers to an Amp in Zone Zone 3 12V Trigger TX-NR807Connecting Zone Multi Zone-ContinuedSetting the Powered Zone 2/3 followed by the SETUP buttonPress the SETUP button Multi Zone—ContinuedSetting the Multi Zone The setup menu closesMulti Zone—Continued Using Zone 2/3 Controlling Zone 2/3 with the Remote ControllerControlling Zone 2/3 from the AV receiver Multi Zone—ContinuedAdjusting the Volume for Zones Adjusting the Tone and Balance of ZonesMuting Zones Multi Zone—ContinuedUsing the Remote Controller in Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Zone 2/3 Using a Multiroom Kit with Other ComponentsPreprogrammed Remote Control Codes Looking up for Remote Control CodeControlling Other Components 5 6 7 Controlling Other Components—ContinuedThe “Remote Mode Setup” menu The setup menu closesEntering Remote Control Codes Controlling Other Components-ContinuedThe codes are organized by category e.g., DVD player, TV, etcResetting REMOTE MODE Buttons Resetting the Remote ControllerControlling Other Components-Continued 11807: TV withg h i p Controlling Other Components—Continuedgq r h Controlling Other Components—Continuedbcdef g k l m n ohp q i r Controlling a VCR or PVRh i j bk c dl m n Controlling Other Components—Continuedah i j k b c Controlling Other Components—Continuedah i j k Controlling Other Components—ContinuedControlling a Cassette Recorder Controlling Other Components—ContinuedNotes Activities Setup 1 2 3 4TV Power On Source Power On7 8 9 Here are the default settingsthe AV receiver’s remote control sen Controlling Other Components—ContinuedLearning Commands Controlling Other Components—ContinuedNotes Using Normal Macros Making MacrosRunning Macros Deleting MacrosTroubleshooting Power Can’t turn on the AV receiverAudio There’s no sound, or it’s very quiet Only the front speakers produce soundTroubleshooting—Continued Troubleshooting—Continued Remote ControllerThe remote controller doesn’t work Video There’s no pictureTroubleshooting—Continued Can’t control other componentsTroubleshooting—Continued Video ATT:OFF: defaultOthers Video AttenuationTroubleshooting—Continued Important Note Regarding Video PlaybackCOMPONENT VIDEO MONITOR OUT Note TX-NR807Specifications TX-NR807 Amplifier SectionVideo Section Tuner SectionSpecifications HT-RC180 power per channel, 8 ohm loads,Amplifier Section Video SectionVideo Resolution Chart NTSCMemo 2 9 4 0 0 0 2 ONKYO U.S.A. CORPORATIONONKYO EUROPE ELECTRONICS GmbH ONKYO EUROPE UK Office