Onkyo HT-RC180, 29400021, TX-NR807 instruction manual CBL/SAT in S

Connecting the AV receiver—Continued

Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source

Hint!

With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV receiver, useful if your TV has no audio outputs.

Step 1: Video Connection

Choose a video connection that matches the video source ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV via the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches the video source ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from the video source or listen in Zone 2 or Zone 3.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 or Zone 3 as well, use and , or and .)

Connection		AV receiver	Signal flow	Video source
	A	COMPONENT VIDEO IN 2 (CBL/SAT)	⇐	Component video output
		CBL/SAT IN S	⇐	S-Video output
	C	CBL/SAT IN V	⇐	Composite video output
		CBL/SAT IN L/R	⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 3 (CBL/SAT)	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 2 (CD)	⇐	Digital optical output

	A
b
	C
c
a	B

	L		R
COAXIAL	OPTICAL	AUDIO	S VIDEO	VIDEO	Y	PB	PR
OUT	OUT	OUT	OUT	OUT	COMPONENT VIDEO OUT

Satellite, cable, set-top box, etc.

When you use connection c , you need to assign the digital audio input (see page 50).

34