Onkyo HT-RC180 Monitor Out Setting Set to Analog, Video Signal Flow and the Resolution Setting

Connecting the AV receiver—Continued

■“Monitor Out” Setting Set to “Analog”

With the “Monitor Out” setting set to “Analog” (see page 43), video input signals flow through the AV receiver as shown, with composite video and S-Video sources being upconverted for the component video output. Use this setting if you

connect the AV receiver’s COMPONENT VIDEO MONITOR OUT to your TV.

Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs.

The composite video, S-Video, and component video outputs pass through their respective input signals as they are.

This signal flow also applies when the “Resolu- tion” setting is set to “Through” (see page 46).

Video Signal Flow and the Resolution Setting

When the “Monitor Out” setting is set to “Ana- log” (see page 43), if the “Resolution” setting is set to anything other than “Through” (see page 46), the video signal flow will be as shown here, with composite video and S-Video sources being upconverted for the component video out- put.

The composite video, S-Video, and component video outputs pass through their respective ana- log input signals as they are. HDMI input signals are not output.

DVD/BD player, etc.		Video Signal Flow Chart
	Composite		S-Video	Component	HDMI

IN

AV receiver

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.
DVD/BD player, etc.		Video Signal Flow Chart
	Composite		S-Video	Component	HDMI

IN

AV receiver

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.

28