Onkyo 29400021 Advanced Setup-Continued, On: Power Control enabled, Notes, TV Control

Models: TX-NR807 HT-RC180 29400021

1 148
Download 148 pages 17.31 Kb
Page 102
Image 102
Power Control

Advanced Setup—Continued

Power Control

On: Power Control enabled.

 

Off: Power Control disabled.

To link the power functions of

-compatible components connected via HDMI, select “On”.

This setting is set to “On” automatically when the above “HDMI Control (RIHD)” is set to “On” for the first time.

Notes:

The “Power Control” setting can be set only when the above HDMI Control (RIHD)setting is set to “On”.

HDMI power control only works with On: Power Control enabled.Off: Power Control disabled.To link the power functions of -compatible components that support it and may not work properly with some components due to their settings or compatibility.

When set to “On”, the power consumption on standby mode increases.

When set to “On”, regardless of whether the AV receiver is On or on Standby, both audio and video received by an HDMI input will be output by the HDMI OUT for playback on the TV or other component that’s connected to the HDMI OUT.

Refer to the connected component’s instruction manual for details.

TV Control

On: TV Control enabled.

 

Off: TV Control disabled.

Set to “On” when you want to control the AV receiver from an TV ControlOn: TV Control enabled.Off: TV Control disabled. -compatible TV that is connected to HDMI.

Notes:

Do not assign the component connected with the HDMI input to the TV/TAPE selector when you set “TV Control” setting to “On”. Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guar- anteed.

Set to Offwhen the TV is not compatible or when it is unclear whether the TV is compatible or not.

The “TV Control” setting can be set only when the above HDMI Control (RIHD)and “Power Control” settings are both set to “On”.

Refer to the connected component’s instruction manual for details.

Note:

After changing the settings of the HDMI Control (RIHD), “Power Control”, or “TV Control”, set all con- nected pieces of equipment to Standby and then turn them on again. Refer to the User’s Manuals for all connected pieces of equipment.

Network

See “Network Settings” on page 113.

Firmware Update

Notes:

Perform the firmware update only when an announcement is posted on the Onkyo Web site.

It takes about 40 minutes to complete the firmware update.

Version

The current version of the firmware is displayed. The version is made up of the versions of the AV receiver and Onkyo dock (if connected).

Receiver

via NET

You can update the AV receiver’s firmware. Check the network connection before update. Do not shutdown the power of the AV receiver while update.

Universal Port

via NET

You can update the Onkyo dock’s firmware. Check the network connection before update. Do not shutdown the power of the AV receiver while update.

Note:

• This update shall not be performed when no dock is connected to UNIVERSAL PORT jack.

102

Page 102
Image 102
Onkyo 29400021 Advanced Setup-Continued, On: Power Control enabled, Off: Power Control disabled, Notes, TV Control