Onkyo TX-NR807, 29400021 Digital Audio Input Setup, Assign, and then press Enter, Examples

First Time Setup—Continued

Digital Audio Input Setup

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD/ BD input selector, although this can be changed.

Here are the default assignments.

Input selector	Default assignment
DVD/BD	COAX1
VCR/DVR	COAX2
CBL/SAT	COAX3
GAME	OPT1
AUX	FRONT (Fixed)
TV/TAPE	- - - - -
TUNER	- - - - - (Fixed)
CD	OPT2
PHONO	- - - - -
PORT	- - - - -

1 Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [q]/[w] but-
	tons to select “1. Input/Output

Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1. Input/Output Assign

1.Monitor Out

2.HDMI Input

3. Component Video Input

4. Digital Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “4. Digital Audio
	Input”, and then press [ENTER].

The “Digital Audio Input” menu

appears.
1–4.	Digital Audio Input
DVD/BD	COAX1
VCR/DVR	COAX2
CBL/SAT	COAX3
GAME	OPT1
AUX	FRONT

4 Use the Up and Down [q]/[w] but- tons to select an input selector, and use the Left and Right [e]/ [r] buttons to select “COAX1”, “COAX2”, “COAX3”, “OPT1”, “OPT2”, or “- - - - - (analog)”.

• When an HDMI IN is assigned to an input selector in “HDMI Input Setup” on page 48, the AV receiver will select audio from HDMI IN as a priority.

• Press the [ENTER] button when you do not use the signal of audio from the HDMI IN. The “* ” mark is dis- played like “COAX1* ”.

•“AUX” is used only for digital input from the front panel terminals.

Examples:

If you connect your DVD player to the OPTICAL IN 1 jack, set “DVD/BD” to “OPT1”.

If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set “VCR/DVR” to “OPT2”.

If you want to listen to audio from the component connected to the COAXIAL IN 1 jack when the CBL/ SAT input selector is selected, set “CBL/SAT” to “COAX1”.

For input selectors that you don’t want to assign a digital input jack, set to “- - - - - (analog)”.

5	Press the [SETUP] button.
	The setup menu closes.

Notes:

•If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

50