Programming
Deregistering a handset
A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system.
1MMenuN (right soft key) #131
R All handsets registered to the base unit are displayed.
2MbN: Select the handset you want to cancel. a MOKN
3MbN: “Yes” a MOKN
4 MN
Cancelling a base unit
A handset can cancel a base unit that it is registered to. This allows the base unit to end its wireless connection with the system.
1MMenuN (right soft key) #139
2MbN: Select the base unit you want to cancel. a MOKN
3MbN: “Yes” a MOKN a MN
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 3. Contact your Panasonic dealer for details.
Important:
RBefore registering the DECT repeater to this base unit, you must turn the DECT repeater mode on.
RDo not use more than one DECT repeater at a time.
Setting the DECT repeater mode
1MMenuN (right soft key) #138
2MbN: Select the desired setting. a MOKN
a MN
Registering the DECT repeater (KX-A405) to the base unit
Note:
RPlease use a DECT repeater that has not yet been registered to another unit. If the DECT repeater is registered to another unit, deregister it first, referring to the Installation Guide for the DECT repeater.
1Base unit:
Press and hold MN for about 5 seconds.
2DECT repeater:
Connect the AC adaptor, then wait until
the indicator and indicator light green.
3Base unit:
To exit the registration mode, press MN.
34
PRW110FX(en)_0724_ver012.pdf 34
2013/07/24 13:40:26