Controls, Base unit, During a power failure | Panasonic KX-PRW110FX

Getting Started

RWhen the batteries are fully charged, “Fully charged” is displayed.

1

Note when setting up

Note for connections

RThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

RThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack, if you have such a telephone jack in your house.

Note for battery installation

RUse the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 3, 7.

Note for battery charging

RIt is normal for the handset to feel warm during charging.

RClean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if

the unit is exposed to grease, dust, or high humidity.

Battery level

Icon	Battery level
	High
	Medium
	Low
	Needs charging.

Panasonic Ni-MH battery performance (supplied batteries)

Operation		Operating time
In continuous use		11 hours max.

Not in use (standby)		150 hours max.

Note:

RActual battery performance depends on usage and ambient environment.

Controls

Base unit

A B

MN (Locator)

RYou can locate a misplaced handset by pressing MN.

Charge contacts

11

PRW110FX(en)_0724_ver012.pdf 11

2013/07/24 13:40:25

Image 11

Panasonic KX-PRW110FX operating instructions Controls, Base unit, During a power failure, Battery level

Contents

Thank you for purchasing a Panasonic product Premium Design Phone with Smartphone Connect Table of Contents Other information Accessory informationSupplied accessories Additional/replacement accessories Your smartphone 4 max Expanding your phone systemSmartphone Handset optional KX-PRWA10FX Declaration of Conformity General informationFor your future reference For your safety Base unit location/avoiding noise Important safety instructionsBattery For best performance For business users in the European Union Other informationRoutine care Specifications Connections Setting upBattery installation Battery charging Base unit During a power failureBattery level Controls Handset display items Symbol MeaningDisplay icons Handset Date and time Turning the power on/offLanguage setting Other settings Dialling mode One touch eco mode Hold Useful features during a callMaking calls Answering calls Recall/flash For call waiting or Call Waiting Caller ID service usersTemporary tone dialling for rotary/pulse service users Mute Answering an intercom call IntercomKey lock Making an intercom call Adding phonebook entries PhonebookCategories Chain dial Finding and calling from a phonebook entryEditing entries Erasing entries Speed dial Menu list Display the menu tree and direct command code table Off Receive List Send List Create SettingsMemo Alarm Alarm1-5 Once Time Adjustment *2, *6 Caller ID Time Settings Set Date/Time *2 Ringer Setup Ringer VolumeNight Mode Start/End Night Mode 30 sec Wallpaper Wallpaper1 Eco Setup Transmission NormalDisplay Setup Power*2 Speed Dial Code Network Setup Current Status Line Setup Dial Mode *2 PulseMsec # 160 msec Privacy Mode *2, *17 National Access Česká rep Select Base Slovensko Auto Cancel Base*20Battery Check Country*2 Other Česká rep. = 100 msec. Slovensko = 100 msec Alarm Selecting categories to bypass night mode Night modeTurning night mode on/off Setting the ring delay Viewing/editing/erasing bar call numbers Incoming call barringBaby monitor Storing unwanted callers Setting the baby monitor Call restriction Other programmingAnswering the baby monitor Changing the handset name Calendar/Schedule Changing the unit’s region setting/Resetting the base unitChanging the base unit PIN Registering a handset to a base unit Registering a unitOperating additional units Deregistering a handset Cancelling a base unitSetting the Dect repeater mode Increasing the range of the base unit Caller list Using Caller ID service Erasing all caller information Storing SMS message centre numbers Setting up SMSSending a message Turning SMS on/off Receiving a message Storing the PBX line access number for PBX users only Smartphone integration Network settingsTypical configuration Dhcp Smartphone Connect app Other network features Confirming network status Confirming your wireless router’s Wi-Fi signal strengthResetting the base unit’s network settings Character entry modes Voice mail serviceWhen the unit displays the character entry screen Character entry Extended 1 character table Alphabet character table ABCNumeric entry table Greek character table Display message Error messagesCause/solution Cyrillic character table Not available for SMS You must first subscribe To Caller ID TroubleshootingProblem General use Making/answering calls, intercom Battery rechargeMenu list Caller ID Liquid damage SMS Short Message Service Network connection troubleshooting Cannot obtain IP Failed to connect is displayed Wrong Password isIP Address conflicts is Index 2013/07/24 2013/07/24 2013/07/24 Romania Sales Department Czech Slovakia