Panasonic KX-PRW110FX Smartphone integration, Network settings, Typical configuration Dhcp

Smartphone Integration

Smartphone integration

You can install the free Smartphone Connect app on your smartphone and use your smartphone as an extension of your phone system. The following features are available when using the app.

–Making and receiving calls using your landline

–Making and receiving intercom calls

–Checking your call log

–Copying phonebook entries from your smartphone to your phone system

–Transferring landline calls between your smartphone and your handsets

–Copying images from your smartphone to your handsets to be used as wallpaper patterns (Android™ version only)

–Copying the ringtone from your smartphone to your handsets (Android version only)

Requirements

RiPhone 4, iPhone 4S, iPhone 5, iPad, or iPad mini (iOS 5.0 or later)

or

An Android device (Android 4.0 or later)

RThe Smartphone Connect app (see page 41)

RA wireless router (IEEE 802.11g or IEEE 802.11n recommended)

RYou must configure both your base unit and your smartphone to connect wirelessly to your home network via your wireless router.

RIn order to use most of the app’s features, your smartphone needs to be connected to the same wireless router as your base unit. (You cannot use these features while away from home.)

Functionality information

RThe app may not function properly depending on system environment, such as your smartphone model, peripherals connected to your smartphone, and the apps installed on your smartphone.

Trademarks

RAndroid is a trademark of Google Inc.

RiPhone and iPad are trademarks of Apple Inc.

RWi-Fi®is a registered mark of the Wi-Fi Alliance.

RAll other trademarks identified herein are the property of their respective owners.

Network settings

Before you begin

Confirm the following before you configure the base unit to connect wirelessly to your home network.

RMake sure your wireless router is turned on and functioning.

RMake sure that you know your wireless router’s Wi-Fi settings, including its SSID (wireless network name), security password, etc. In some situations, you may also need to know the IP-related settings required in order for the base unit to connect to your wireless router, including your wireless router’s IP address, subnet mask, etc.

RMake sure you have the operating instructions included with your wireless router handy.

Typical configuration (DHCP)

1MMenuN (right soft key) #523

2MbN: “Search for Networks” a MOKN R The base unit searches for available

wireless networks and

“Searching...” is displayed.

R When searching is complete, a list of available wireless networks is displayed, including the SSID, security setting, and signal strength.

R The base unit cannot find your wireless router if the wireless router does not broadcast its SSID. If there is a “stealth mode” setting, turn it off; if there is a “SSID broadcast” setting, turn it on. Change the appropriate setting before performing this procedure, and then change it back when finished.

40

PRW110FX(en)_0724_ver012.pdf 40

2013/07/24 13:40:27