Panasonic KX-PRW110FX operating instructions Smartphone Connect app, Other network features

					Smartphone Integration
3	MbN: Select your wireless router’s SSID.		2		MbN: “Manual (Static)” a MOKN
4	a MOKN		3 MbN: Select the desired item. a MOKN
	Confirm the SSID and then press MOKN.		4 Enter the desired setting. a MOKN
5	Enter the password required to access
					R Press MFEN to move the cursor if
	the wireless network. a MOKN				necessary.
	R After the base unit connects to the		5 Set the other items as necessary.
		wireless router, “Connected to” and
			6		MbN: “<Save>” a MOKN a M	N
		your wireless router’s SSID is
6		displayed.
	M	N
			Smartphone Connect app
Simplified configuration (WPS,
				Once you have configured the base unit’s
DHCP)				Wi-Fi and network settings, you are ready to
This procedure requires a wireless router that				download the Smartphone Connect app.
				Download information is available at the web
supports WPS. If your wireless router supports
				page listed below.
WPS, make sure the feature is turned on, and
locate its WPS button before beginning this
procedure. The WPS button is typically
labelled “WPS” or has two curved arrows on it.
1	MMenuN (right soft key) #523
2	MbN: “WPS (Easy Setup)” a MOKN			www.panasonic.net/pcc/support/tel/air

3Press the WPS button on your wireless

	router and then press MOKN on the				For information about using the app, refer to
	handset.				the Smartphone Connect App Guide, which is
	R The base unit searches for your				available for download at the web page listed
		wireless router and “Searching...”			above.
		is displayed.
	R After the wireless router is found, the
		base unit’s Wi-Fi settings will be
					Other network features
		completed automatically. When the
		setup is complete, “Connected to”
		and your wireless router’s SSID is		Wi-Fi repeater mode
4 M		displayed.			You can increase the signal range of your
		N
					wireless network by turning on the base unit’s
					Wi-Fi repeater mode feature.
Advanced configuration (static IP					1 MMenuN (right soft key) #538
settings)				2 MbN: Select the desired setting. a MOKN
After using the procedure explained in “Typical				Important:
configuration (DHCP)”, page 40 or “Simplified				R If using Wi-Fi repeater mode, do not place
configuration (WPS, DHCP)”, page 41, use					the base unit and your wireless router too
the procedure below to set the base unit’s IP					close to each other. If they are too close,
settings manually if necessary.					using Wi-Fi repeater mode can cause the
This procedure is not necessary for most					sound to cut out briefly during landline calls.
users.				R Do not use Wi-Fi repeater mode if you
1	M	N	#500		already have a Wi-Fi range extender. If you
		Menu (right soft key)
				41

PRW110FX(en)_0724_ver012.pdf 41

2013/07/24 13:40:27