Panasonic KX-TD816E, KX-TD1232E user manual Using a Flexible CO button

Operation

Calling an external party

You have to seize an outside line before dialling an outside phone number because external calls are made via your system.

Select one of the following methods:

F1-F3

• Press an idle button.

(CO)

•Dial automatic line access number WXYZ . An idle line is selected automatically.

• Dial outside line number	TUV	to	TUV	TUV	.
A specific line is selected.

◆Using a Flexible CO button

PT andPS SLT

F1-F3

phone no.

C

(CO)
Press CO.	Enter phone number.	Talk.	Press CANCEL.

◆Using automatic line access number / outside line number

PS

WXYZ

OR

TUV

to

phone no.

C

TUV	TUV		Press CANCEL.
Press TALK.	Enter phone number.	Talk.

Seize an external line (9 or 81-88).

• You can also finish the conversation by placing the PS on the charger or pressing TALK button.

•If “ flashes,” move towards the Cell Station until the sign stops flashing and try again.

•Emergency call

You can dial pre-programmed emergency numbers without any restrictions.

(Default: 999, 112)

☞Customising Your PS

•PBX Programming – Customising the Buttons Create or re-arrange the Loop-CO button, Group-CO button and Single-CO button.

!!

•To select the less expensive line automatically, dial “9” or press the Loop-CO button to seize a line. (Automatic Route Selection) F1 button is already assigned as the Loop-CO button.

•Confirming the dialled number before connecting

You can go off-hook after confirming the number you dialled. If you misdial, press the CLEAR button to clear each number from the right.

•If you go off-hook first and then misdial, press the FLASH button and enter the number again.

•Call information

The following information can be referred to by repeatedly pressing the CO button in use.

–Phone number (outgoing call) or call duration (incoming call)

– Meter – Call charge

5-10 DECT Portable Station