Panasonic KX-TD1232E Calling an external party, Phone no, Emergency call, Call information

Calling an external party

You have to seize an outside line before dialling an outside phone number because external calls are made via your system.

Select one of the following methods:

• Press an idle (CO)	button.
• Dial automatic line access number			9 .
An idle line is selected automatically.
• Dial outside line number 8		1	to 8	8 .
A specific line is selected.

PT / SLT

(CO)

OR

	9		phone no.
	OR
	8	1
Off-hook.	to		Enter phone number.	Talk.
	8	8

Seize an external line (CO, 9 or 81-88).

Operation

• The CO button light shows the current status as follows: Off: The line is idle.

Green on: You are using the line.

Red on: The line is in use.

•CO1 to CO8 correspond to outside line numbers 81 to 88 respectively.

•Emergency call

You can dial pre-programmed emergency numbers without any restrictions.

(Default: 999, 112)

☞Customising Your Phone

•Initial Settings

–Preferred Line Assignment — Outgoing Select the seized line when going off-hook.

•Customising the Buttons

Create or re-arrange the Terminate button.

•Charge Fee Management

!!

•Hands-free operation

You can have a conversation in the hands-free mode using the SP-PHONE button. You can then perform other tasks at the same time.

Helpful hints for hands-free operation

–Use your telephone in a quiet room for best performance.

–If the other party has difficulty hearing you, decrease the volume.

–If you and the other party talk at the same time, parts of your conversation will be lost. To avoid this, talk alternately.

•To select the less expensive line automatically, dial “9” or press the Loop-CO button to seize a line. (Automatic Route Selection)

•Confirming the dialled number before connecting

You can go off-hook after confirming the number you dialled. If you misdial, press “ ” to clear each number from the right or press the FLASH/RCL button to clear all numbers.

•Call information

The following information can be referred to by repeatedly pressing the CO button in use.

–Phone number (outgoing call) or call duration (incoming call)

–Meter

–Call charge

•To call another party without hanging up, just press the Terminate button or “TRM” button on the display, re-access an outside line and dial the new phone number.

Operation 2-9