1.7 Setting the Telephone According to Your Needs

1.7.2Refusing Incoming Calls (Do Not Disturb [DND])

Do Not Disturb (DND)

Switching FWD/DND Status Using Fixed FWD/DND Button

Do Not Disturb (DND)

You can set this feature to prevent incoming calls from ringing at your extension. This can be useful, for example, when you are in a meeting or busy.

To set/cancel

PT/SLT/PS

 

 

 

0

Both Calls

 

 

 

OR

 

 

7

1

1

Outside Calls

 

OR

 

 

 

 

 

 

 

 

2

Intercom Calls

Off-hook.

Enter 71.

 

Enter 0 to 2 as you desire.

1

Set

 

OR

 

 

0

Cancel

C.Tone

 

Enter 1 to set

On-hook.

or 0 to cancel.

 

When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing the FWD/DND button (fixed button) instead of "710".

The FWD/DND button light shows the current status as follows: Off: Both features are not set.

Red on: FWD mode

Flashing red slowly: DND mode

The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting Mode. Ask your manager what mode your system is in if you are not sure.

(1)When in FWD/DND Cycle Switch Mode:

Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as shown below:

FWD DND Off

(2)When in FWD/DND Setting Mode:

Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the FWD/DND status and set the FWD destination (refer to "Switching FWD/DND Status Using Fixed FWD/DND Button").

Note

A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the mode cannot be changed.

If your extension has set this feature, a calling extension will hear DND tone.

If this feature is set, the Call Forwarding (FWD) feature does not work.

Specified extensions can override this feature and call DND extensions (DND Override).

User Manual

111

Page 111
Image 111
Panasonic KX-TDA15 user manual Refusing Incoming Calls Do Not Disturb DND, Red on FWD mode Flashing red slowly DND mode