Panasonic KX-TDA600 manual Call Monitor, To monitor, Press Call Park

1.3 Telephone Features and Operation

•If Automatic Call Hold has been preprogrammed, you can put the current call on hold automatically by pressing another CO, ICD Group or INTERCOM button to make or answer another call.

•For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX-TDA200/KX-TDA600 only)".

1.3.7Call Monitor

A preprogrammed extension user can listen to the ongoing conversation of a busy extension user.

To monitor

PT/SLT/PS

(DSS)

OR

	(PDN)	5	Monitoring starts
	OR	B.Tone	C.Tone
Off-hook.	(SDN)	Enter 5.
	OR
	extension no.

Press red DSS, PDN, or SDN, or dial extension number.

1.3.8Call Park

You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the parked call. You can use this feature as a transferring feature.

A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call Park button and Call Park (Automatic Park Zone) button have been established, you can select either way to park by simply pressing the corresponding button.

When a call is parked automatically, or more than one call has been parked at the same time, you need to specify the parking zone number to retrieve the required call.

To set

PT/PS

During a conversation

(Call Park)

Press Call Park.

38

Operating Manual