Programmable Functions

Date and Time Handset

” flashes on the base unit display if the clock has not been set. Set the clock by following the steps below.

1Press [MENU].

2 Scroll to “Date and time” by pressing [ >] or [> ], then press Select.

31 Enter 2 digits each for month, day and year. (Ex. To set Apr. 7, 2003, enter “04 07 03”.)

2Enter 4 digits for time (hour and minute). (Ex. To set 9:30, enter “0930”.)

• If you enter a wrong number, press [ >] or [> ] to move the cursor to the incorrect number. Enter the correct number.

4Select “AM” or “PM” by pressing AM/PM.

Date and time

Exit >> Select

Date:12.31.2003

Time:12:00 AM

AM/PM Save

Example

Date:04.07.2003

Time:09:30 AM

AM/PM Save

Date:04.07.2003 Time:09:30 AM

AM/PM Save

5Press Save, then press [OFF].

The clock is set and “ ” disappears from the base unit display.

If 3 beeps sound after pressing Save, the setting is not correct. Start again from step 3.

When entering the time in step 3, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, then select “PM” in step 4.)

If a power failure occurs, the time setting may be incorrect. When “ ” flashes on the base unit display, adjust the date/time.

12

Page 12
Image 12
Panasonic KX-TG2224W, KX-TG2224F Programmable Functions Date and Time Handset, Select AM or PM by pressing AM/PM