Panasonic KX-TG2224W, KX-TG2224F Settings, Battery strength, Recharge, Battery information

Settings

Battery strength

You can check the battery strength on the handset display. The battery strength is as shown in the chart on the right.

Display prompt		Battery strength
		Fully charged
		Medium
		Low
	(flashing)	Needs to be recharged.

Preparation

Recharge

Recharge the battery when:
—“Recharge battery” is displayed on the handset,
		Recharge battery
—“	” flashes, or

—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the display

will continually indicate “Recharge battery” and/or “	” will flash when the
handset is lifted off the base unit.

Battery replacement:

If you cleaned the charge contacts and fully charged the battery, but after a few

telephone calls, “Recharge battery” is displayed and/or “ ” continues to flash, the battery needs to be replaced. Please order a new Panasonic HHR-P513 battery at the telephone number shown on page 2. To replace the battery, see page 8.

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

Battery information

After your Panasonic battery is fully charged:

Operation	Operating time
While in use (TALK)	Up to 5 hours
While not in use (Standby)	Up to 11 days

•The battery operating time may be shortened depending on usage conditions and ambient temperature.

•Clean the charge contacts of the handset and the base unit with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base

unit until “Recharge battery” is displayed and/or “	” flashes. This will
maximize the battery life.
• The battery cannot be overcharged.

For assistance, please call: 1-800-211-PANA(7262)

9