Panasonic KX-TG2224F, KX-TG2224W, KX-TG2224P Intercom, Paging the base unit from the handset

Intercom

Handset Base Unit

A 2-way intercom can be set up between the base unit and the handset.

Paging the base unit from the handset

1Handset: Press [MENU].

2Handset:

Scroll to “Intercom” by pressing [ >] or [> ], then press Select.

3Base unit:

When the other party’s voice is heard after the beeps, answer using the MIC.

•The IN USE/CHARGE indicator lights.

4To disconnect the intercom, press [OFF] on the handset.

OR

Press [LOCATOR/INTERCOM] on the base unit.

•The IN USE/CHARGE indicator goes out.

Paging the handset from the base unit (Handset locator)

Using this feature, you can also locate the misplaced handset.

1Base unit:

Press [LOCATOR/INTERCOM].

•The handset beeps for 1 minute and displays “Paging”.

•The Ringer and IN USE/CHARGE indicators flash.

•To stop paging, press [LOCATOR/INTERCOM] on the base unit.

Cordless Telephone

2Handset:

Press Intercom to answer.

•The handset displays “Intercom”.

3Base unit:

Talk into the MIC.

4To disconnect the intercom, press [OFF] on the handset.

OR

Press [LOCATOR/INTERCOM] on the base unit.

•The IN USE/CHARGE indicator goes out.

•If you do not want to answer the page in step 2, press [OFF] to stop paging.

During an intercom call:

• If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing VOL. [ >].

•If noise interferes with the conversation, press CH while “CH” is shown on the handset display. The unit selects a clearer channel.

•If an incoming call is being received, the intercom call stops and the unit starts

to ring. To answer, press [] or [].

For assistance, please call: 1-800-211-PANA(7262)

37