Panasonic KX-TG2224W, KX-TG2224F, KX-TG2224P Remote Code Handset, Summary of remote operation

Remote Operation from aTouchTone Phone

You can operate the Answering System from any touch tone phone.

A synthesized voice menu will guide you through the Answering System (p. 46).

• To skip the voice menu and operate the unit directly, see page 47.

Summary of remote operation

Call your unit from a touch tone phone.

Enter your remote code (see below) during or after the greeting message.

• The number of new messages is heard.

After 3 seconds, the voice menu will start (p. 46).

Follow the menu or enter the direct commands (p. 47).

To end remote operation, hang up.

•The unit will announce the remaining recording time after playback, if it is less than 3 minutes.

•The messages are saved.

Remote Code Handset

The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99)for your remote code.

The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [>]			Initial setting
	or [>], then press Select.
3	Scroll to “Set answering” by pressing [>] or			Exit	>> Select
			Set answering
	[>], then press Select.
4	Scroll to “Remote code” by pressing [>] or			Back	>> Select
				Remote code
	[>], then press Select.
5	Enter a 2-digit remote code (00–99).			Back	>> Select
		Remote code
					:11
				Back	Save

6Press Save, then press [OFF].

To check the remote code, repeat steps 1 to 4.

• The remote code is displayed. When finished, press [OFF].

For assistance, please call: 1-800-211-PANA(7262)

Answering System

45