25
Preparation
In step 7, you cannot enter numbers greater than 12. Do not use military.
(To set 13:00 hours, enter “0100”, and select “PM” by pressing (*).)
If a power failure occurs, the time may be shifted. When “ ” flashes
on the base unit display, reprogram the current day/time.
For Caller ID service users (p. 31)
The Caller ID information will re-set the clock after the first ring if the adjusted
time is incorrect. However, the day will not be re-set. Set the day following the
procedures on page 24.
If the time has not previously been set, the Caller ID information will not adjust
the clock.
The Caller ID information will automatically adjust the clock for daylight saving
time.
To check the time/day
Repeat steps 1 to 6 on page 24.
The current time/day is heard. When finished, press (FUNCTION/EXIT/CH).