Safety Instructions, Medical | Panasonic KX-TG2581ALS, KX-TG2581NZS

Safety Instructions

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO LIQUID OR ANY TYPE OF MOISTURE.

When a failure occurs which results in the internal parts becoming accessible, disconnect AC adaptor immediately and return this unit to the place of purchase or service centre.

If there is any trouble, disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, do not reconnect the unit to the telephone line until the fault has been repaired. If the known working phone does not operate properly, consult your telephone company.

This equipment has been tested and found to comply with AS/NZS 3548: 1995 limits for electromagnetic interference. Any modiﬁcations to any part of the system or to any peripherals may void the EMC compliance of the system or the peripherals.

This equipment will be inoperable if mains power fails.

The earcap on the handset is magnetised and may retain metallic objects.

Operating near 2.4GHz electrical appliances may cause interference. Move away from the electrical appliances and/or press the CH (Channel) button.

Medical

Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 2401MHz to 2462MHz, and the power output level can range from 0.001 watts to 0.10 watts.) Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

76

Image 76

Panasonic KX-TG2581ALS, KX-TG2581NZS operating instructions Safety Instructions, Medical

Contents

Charge the battery for about 6 hours before initial use Operating Instructions Before Initial Use Accessories includedFor your future reference For Best Performance Battery ChargeBase Unit Location/Noise Contents Setting the Unit to Answer Calls Answering System Location of Controls How to use the Navigator keyHandset Base unit Displays Handset displayNo items stored Recharge New calls New calls GF H=Directory Ringer off Ann Paging Press Intercom 00-00-07 0266667777 Waiting Displays Base unit display Settings Connections Display prompt Battery strength Battery strengthFully charged Medium Low ﬂashing Needs to be recharged Settings Battery informationStandby Mode While the handset is off the base unit Recharge Using the Belt Clip Using an Optional HeadsetTo attach the belt clip To remove the belt clip Connection an optional headset to the handset Selecting the Line Mode Programmable Functions ProgramLCD contrast............. To select the LCD contrast p During programming Setting the Auto Talk Feature Points to Talk switchingSet line mode HTalk switching Programmable Functions Selecting the Ringer Volume Save directory HRinger volumeTo turn the ringer ON, press Ñ or Ö Ringer Selecting the LCD Contrast Points to LCD contrastPress Ö or Ñ to select the desired Contrast Preparing the Answering System Greeting MessageTo record a greeting message Greeting message sample Flash Memory Message Backup Preparing the Answering SystemTo erase the recorded greeting message Pre-recorded greeting message Programming Summary for the Answering System To select the caller’s recording time , press Day and Time Adjustment To check the time/day For Caller ID service users pRepeat steps 1 to 6 on Selecting the Caller’s Recording Time Press 1, 2 or 3 to select the recording time Toll saver When set to Auto Selecting the Number of Rings Making Calls If noise interferes with the conversationTo redial the last number dialled Talk To dial after conﬁrming the entered number To redial after conﬁrming the last number dialledTo increase, press Ñ To decrease press Ö Loud Answering Calls Auto TalkLighted handset keypad Backlit LCD display Caller ID Service How caller information is displayed when a call is receivedPrivate name display 0244448888 Caller ID Service To check the number of new callsFor New Zealand Users While the handset is on the base unit Using the Caller List Viewing the Caller ListTo check who has called, follow the steps below To exit the list, press Using the Caller List Ex. When you search from the most recent callTo return to the previous caller To exit the Caller List New calls GF H=Directory 0355566677 1120A JAN12 Talk Calling Back from the Caller ListTalk 00-00-00 Editing the Caller’s Phone Number 0276543210 1120A JAN12 √76543210 =Next H=Edit 0276543210 =Next H=Edit When the caller’s name is not displayed in the Caller List Storing Caller List Information in the DirectoryPress Ö Next key Press FWD/EDIT á Save key 0355566677 =Edit H=Save Enter name IH G=Next To erase a speciﬁc caller from the Caller List Erasing Caller List InformationNew calls GF H=Directory 0246813579 1220A JAN12 √ Clear To erase all entries in the Caller List Press Ö or Ñ to select All clearNew call GF H=Directory HExit All clear Exit HAll clear One-Touch Dialler Storing a Phone Number in the Direct ButtonIH G=Next 123456789012345 123456789012345 =Edit H=Save Save DIRECT# Using the Directory Storing Names and Numbers in the Directory Using the Directory Enter a name, up to 15 characters usingDirectory= 20 items Dialling buttons p If you make a mistake while entering a name Selecting Characters to Enter NamesNumber of times key is pressed Keys When ﬁnished, pressÖ Next key For example, to enter Tom JonesDirectory , press FWD/EDIT á Eight times Finding Items in the Directory Directory list =Caller’s listAnn 0312345678 To search for a name by initial Dialling from the Directory Index tableKeys Index Directory list =Caller’s list Frank Editing an Item in the Directory Jane Walker 0333444555 F=Edit H=Save Erasing an Item from the Directory Directory item you want to erasePress FWD/EDIT á Yes key or Directory list =Caller’s list Helen Clear? =No H=Yes Intercom Paging the base unit from the handsetPaging the handset from the base unit Handset locator Handset Special Features Automatic Security Code SettingFor Call Waiting Service Users in New Zealand Call Waiting and Caller ID Compatible How to Use the Pause Button Recall ButtonFor PBX Line/Long Distance Calls Selecting the recall time Special Features Setting the Unit to Answer Calls Automatic Answering OperationMonitoring incoming calls Press ANSWER!ON to turn on the answering system Listening to Messages Slow Talk Message PlaybackListening to only new messages Listening to all recorded messages During playback To repeat To repeat from the beginning of the messageTo skip To skip to the next message To stop From the Handset Listening to Messages Erasing Messages Erasing a speciﬁc messageErasing all messages Within 5 seconds, press Erase again Remote Operation from a Touch Tone Phone Summary of remote operation Setting the Remote Code Enter a remote code using a 2-digitTo check the remote code Number Remote Operation from a Touch Tone Phone Voice MenuShaded boxes are voice prompts All Message Playback New Message PlaybackRecording a Memo Message Erasing All Messages Direct commands Direct Remote Operation Turning on the answering system Skipping the greeting message Enter the desired direct commands p Remote Operation with the HandsetVoice menu To end remote operation, press RECALL/PLAYBACK Command within 15 seconds, or Voice menu will start pAnswer off is heard and the answering System is turned off Wall Mounting Tuck the telephone line cord insideWall mounting adaptor, then Push it in the direction of the arrow Install screws using the wall template below To charge the handset batteryWall Template Connect the telephone line cord. Mount the unit, then Battery Replacement Few minutes Adding Another Phone Troubleshooting Cordless Telephone Problem Cause & Remedy Digits long, the number will not be Troubleshooting Answering System Problem General Problem Hanging up May have been pressed when you Back Ü or FWD/EDIT áPicked up the handset. Press For Australian Customers Safety Instructions SafetyInstallations Environment Placement Safety Instructions Medical Speciﬁcations Important Information For Australia only InstallationInstructions to customer Service difficulties 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13461ZA-BM S0802-1082