37
Cordless Telephone
Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into
the directory.
Make sure the unit is in the standby mode initially.
1Lift the handset off the base unit and
press Öor Ñto enter the Caller List.
2Press Öor Ñrepeatedly to find the
caller you want to store in the directory.
3To edit the phone number, see page 36,
on step 3.
If not required, press FWD/EDIT átwice.
4Press Ö(Next key).
5Press FWD/EDIT á(Save key).
When the caller’s name is not displayed
in the Caller List:
a) If a name is not required, press Ö
(Next key) and press FWD/EDIT á
(Save key).
b) If a name is required, enter the name
(p. 43). When finished, press Ö
(Next key) and press FWD/EDIT á
(Save key).
•A beep sounds.
•
To continue storing other items, repeat from
step 2.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the display shows “Directory full” in step 5, press (FUNCTION/EXIT/CH)
to exit the list. To erase other stored items from the directory, see page 48.
•After the maximum of 50 items has been stored, “Directory full” is also
displayed.
0355566677
11:20A JAN12
✕
3
10 new calls
GF H
=Directory
Enter name
CINDY TURNER
IH G
=Next
Enter name
IH G
=Next
CINDY TURNER
0355566677
0355566677
F
=Edit
H
=Save
0355566677
G
=Next
H
=Edit