Press (0), or (3) to (7) to set the number of rings.

Selecting the Number of Rings

You can select the number of times the unit rings before the answering system answers a call, from “3” to “7” or “AUTO” (for Toll Saver*). Your phone comes from the factory set to “4”.

Preparation

1

Press (FUNCTION/EXIT/CH).

2

Press Ö or Ñ repeatedly until the arrow

points to “Program”.

3

Press FWD/EDIT á (Yes key).

4

Press Ö or Ñ repeatedly until the arrow

points to “TAD program”.

5

Press FWD/EDIT á (Yes key).

 

• “P” is displayed on the base unit.

6

Press (2).

• The current setting is displayed on the base

unit.

HSave directory Ringer volume

GF H=Yes

HProgram

LCD contrast

GF H=Yes

HSave DIRECT#

Recall time

GF H=Yes

HTAD program

GF H=Yes

Time/day Adj.0 See manual for other settings.

7

8

0:Selects “AUTO”. “A” is displayed.

3–7:The unit will answer after the selected number of rings.

Press FWD/EDIT á (Save key).

A beep sounds.

To return to the standby mode, press (FUNCTION/EXIT/CH).

*Toll saver (When set to “AUTO”)

When you call the unit from a touch tone telephone:

If the unit answers on the 3rd ring, there is at least one new message. If the unit answers on the 5th ring, there are no new messages. Hang up when you hear the 4th ring. This will save you the toll charge for the call.

27

Page 27
Image 27
Panasonic KX-TG2581ALS, KX-TG2581NZS operating instructions Selecting the Number of Rings, Toll saver When set to Auto