Remote Operation with the Handset

You can operate your answering system with the handset.

The announcements and recorded messages can only be heard with the handset.

(RECALL/PLAYBACK)

Summary of remote operation

Press (RECALL/PLAYBACK).

The number of new messages is heard.

Remote operation” is displayed on the handset.

Enter the desired direct commands (p. 65).

If you do not enter a command, the voice menu will start (see below).

After the voice menu, all message playback will start.

To end remote operation, press (RECALL/PLAYBACK).

The messages are saved.

The unit will announce the remaining recording time after playback, if it is less than 5 minutes.

If the unit starts to ring during the remote operation, press (TALK) to answer the call. The remote operation is ended.

If you hear “Memory full” after playback, erase some, or all, of the messages (p. 65).

Voice menu

If no commands are entered after you press (RECALL/PLAYBACK), the unit will start the following voice menu.

Press 4 to play back new messages. Press 5 to play back all messages.

You can enter direct commands even if the voice menu has started.

64

Page 64
Image 64
Panasonic KX-TG2581ALS, KX-TG2581NZS Remote Operation with the Handset, Voice menu, Enter the desired direct commands p