Panasonic KX-TG2680N operating instructions Storing a 1-800 pager number, Press á Save key

Follow steps 1 through 6 on page 62.

8 Press á (Save key).

•A beep sounds.

•To return to the standby mode, press (OFF).

*Pager companies require a delay after the pager number and/or the access code is dialed. Contact your pager company regarding the required pause time. Pressing (REDIAL/PAUSE) once creates a 3.5 second delay and counts as one digit.

•If the line has rotary or pulse service, press (TONE) between the pager number and (REDIAL/PAUSE) in step 7.

Storing a 1-800 pager number

If you use a 1-800 pager number with a PIN code, store the pager number as follows.

1

2 # Enter the 1-800 pager number, and press (REDIAL/PAUSE) 3 times.*

$Enter the PIN code, and press (REDIAL/PAUSE) twice.*

•The entered number is displayed on the base unit.

•If you misdial, press (CLEAR) and enter the correct number.

•You can enter a total of 44 digits.

3 Press á (Save key).

•A beep sounds.

•To return to the standby mode, press (OFF).

*Pager companies require a delay after the pager number and the PIN code are dialed. Contact your pager company regarding the required pause time. Pressing (REDIAL/PAUSE) once creates a 3.5 second delay and counts as one digit.

•If the line has rotary or pulse service, press (TONE) between the pager number and (REDIAL/PAUSE) in step 2.

•Alphanumeric voice dispatch pager services will not work with this function.

Answering System

63