Panasonic KX-TG2680N operating instructions Selecting the Number of Rings, Toll saver, Press

Press (0), or (2) to (7) to set the number of rings.

Preparing the Answering System

Selecting the Number of Rings

You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”*.

Your phone comes from the factory set to “3”.

1	Press (FUNCTION/CH).
2	Press Ö or Ñ repeatedly until the arrow
	points to “Program”.
3	Press á (Yes key).
4	Press Ö or Ñ repeatedly until the arrow
	points to “TAD program”.
5	Press á (Yes key).
	•The base unit display shows programming
	options.
6	Press (2).
	•The current setting is displayed on the base
	unit.
7	0:	Selects “Toll saver”*.

HSave directory Ringer volume

GF H=Yes

HProgram

Calling pager

GF H=Yes

HSave DIRECT#

Set flash time

GF H=Yes

Set dial mode HTAD program

GF H=Yes

Answering system setting. See base unit.

Base unit display

Number of rings :3

2–7:The unit will answer after the selected number of rings.

•The unit will announce a caller’s name after the 2nd ring (Talking Caller ID feature, p. 34). To listen to the name announcements, do not select “2”.

8 Press á (Save key).

•A beep sounds.

•To return to the standby mode, press (OFF).

*Toll saver

When you call the unit from a touch tone telephone:

If the unit answers on the 3rd ring, there is at least one new message. If the unit answers on the 5th ring, there are no new messages. Hang up when you hear the 4th ring. This will save you the toll charge for the call.

26