Panasonic KX-TG2680N Setting the Talking Caller ID Feature, Points to Talk Caller ID

Setting the Talking Caller ID Feature

After subscribing to a Caller ID service, the handset and the base unit will display a caller’s name and phone number (p. 34). Name and telephone number Caller ID service is required. This Talking Caller ID feature allows the unit to announce a displayed caller’s name through the handset and base unit speakers while a call is being received (p. 34). You can listen to the caller’s name instead of looking at the display.

For example, if you receive a call from “JOHN SMITH”, the unit will display “SMITH, JOHN” and announce “Call from SMITH, JOHN” repeatedly until you or the answering system answer the call.

Your unit comes with this feature turned ON, but you may turn it OFF.

Make sure the unit is in the standby mode initially.

Preparation

1	Press (FUNCTION/CH).
2	Press Ö or Ñ repeatedly until the arrow
	points to “Program”.
3	Press á (Yes key).
4	Press Ö or Ñ repeatedly until the arrow
	points to “Talk Caller ID”.
5	Press á (Yes key).
6	Press Ö or Ñ to select “Off” or “On”.
7	Press á (Save key).
	•A beep sounds.

•To return to the standby mode, press (OFF).

HProgram

Calling pager

GF H=Yes

HTalk Caller ID

GF H=Yes

Talk Caller ID

:On

GF H=Save

Talk Caller ID

:Off

GF H=Save

Talk Caller ID

:Off

•You can exit the programming mode any time by pressing (OFF).

17