Panasonic KX-TG2680N Before Requesting Help, Cordless Telephone ProblemRemedy

Before Requesting Help

Cordless Telephone

ProblemRemedy

“No link to base.

Place on cradle and try again.” is displayed and an alarm tone sounds.

•You are too far from the base unit. Move closer and try again.

•Insert the handset in the cradle and try again.

•Plug in the AC adaptor.

•Extend the handset antenna fully.

•Raise the base unit antennas.

Static, sound cuts in/out, fades. Interference from other electrical units.

•Locate the handset and the base unit away from other electrical appliances (p. 3).

•Move closer to the base unit.

•Extend the handset antenna fully.

•Raise the base unit antennas.

•Press (FUNCTION/CH) to select a clearer channel.

The handset and/or the base •The ringer volume is set to OFF. Set to

unit do not ring.	HIGH or LOW (p. 18, 19).
The handset display is	•The handset is in the standby mode
blank.	(p. 9). Press Ö, Ñ, Ü or á to turn
	the display on.

The handset display is still •Charge the battery fully (p. 11). blank after pressing Ö, Ñ,

Üor á.

You cannot store a name and phone number in the directory.

•You cannot store an item in the directory while the unit is in the talk, speakerphone or intercom mode, or while the answering system is in use.

•Do not pause for over 60 seconds while storing.

While programming or searching, the unit starts to ring and stops the program/ search.

•To answer the call, press , or (DIGITAL!SP-PHONE). Start again from the beginning after hanging up.

86