Panasonic KX-TG2680N Problem Remedy, Answering System ProblemRemedy, Message full flashes

Before Requesting Help

Problem			Remedy
You cannot redial by	•If the last number dialed was more than
pressing (REDIAL/PAUSE) or		32 digits long, the number will not be
(REDIAL).		redialed correctly.
	•Access numbers entered after pressing
		(TONE) will not be included when
		redialing.
	•The (REDIAL/PAUSE) button on the
		handset has a double function as either
		redial or pause. It will redial the last
		number dialed if pressed at the outset of
		a call (p. 29). If another number has
		been dialed first, it will operate as a
		pause button (p. 56).
You cannot have a	•Make sure that the headset is connected
conversation using the	•	properly (p. 78, 79).
headset.			may have been pressed. If the
		button lights, press		to continue the

conversation with the headset.

•If “EXIT=Headset” is displayed on the base unit, press (EXIT) to switch from the speakerphone to the headset.

Answering System

ProblemRemedy

The answering system is on, but incoming messages are not recorded.

•The recording time is set to “Greeting only”. Select “1 minute” or “3 minutes” (p. 23).

•Memory is full. Erase some, or all, of the messages (p. 61).

You cannot listen to the	•Make sure that the unit is in the standby
recorded messages.	mode.
“Message full” flashes	•Memory is full. Erase some, or all, of the
on the base unit display and	messages (p. 61).
the ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.

88