Panasonic KX-TG2680N Setting the Remote Code, To check the remote code, Number, Repeat steps 1 to

Setting the Remote Code

The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99). The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”.

Use the handset near the base unit. Make sure the unit is in the standby mode initially.

1	Press (FUNCTION/CH).
2	Press Ö or Ñ repeatedly until the arrow
	points to “Program”.
3	Press á (Yes key).
4	Press Ö or Ñ repeatedly until the arrow
	points to “TAD program”.
5	Press á (Yes key).
	•The base unit display shows programming
	options.
6	Press (1).
	•The current remote code is displayed on the
	base unit.
7	Enter a remote code using a 2-digit
	number (00–99).

HProgram

Calling pager

GF H=Yes

HSave DIRECT#

Set flash time

GF H=Yes

Set dial mode HTAD program

GF H=Yes

Answering system setting. See base unit.

Base unit display

Remote code

:11

Answering System

8 Press á (Save key).

•A beep sounds.

•To return to the standby mode, press (OFF).

•If 6 beeps sound during programming, a wrong key was pressed. Enter the correct number.

To check the remote code

Repeat steps 1 to 6.

•The current remote code is displayed on the base unit. When finished, press (OFF).

69