Panasonic KX-TG2680N operating instructions DIGITAL!SP-PHONE or press

Problem	Remedy
You cannot operate the	•The handset user is operating the
answering system at the	answering system, or is engaged in an
base unit.	outside call. Wait until “Handset in
	use” disappears.

You cannot operate the answering system from a touch tone phone.

•Make sure you enter the correct remote code.

•The answering system may not respond if the tones are too short to activate the unit. Press each button firmly.

•The answering system is off. Turn it on (p. 73).

You cannot operate the	•Someone is operating the answering
answering system with the	system.
handset.	•You are too far from the base unit. Move
	closer to the base unit.
	•The unit is recording a message.
	To answer the call, press		or		.
While recording a greeting	•To answer the call, press
message, the unit starts to	(DIGITAL!SP-PHONE) or press			or
ring and stops recording.		. Start again from the beginning
	after hanging up.
During playback, the unit	•To answer the call, press
starts to ring and stops	(DIGITAL!SP-PHONE) or press			or
playback.		. To resume playback, press
	(NEW!MESSAGE) after hanging up.
The base unit does not	•If the caller is not stored in the Caller
display the name and/or	List, the base unit will not display the
number of the caller whose	caller’s information.
message is being played.
The unit does not alert your •The line mode selection is incorrect.
pager.	See page 14.

Useful Information

89