Getting Started
2Enter the current date, month, and year.
a 
Example: 15 July, 2012 15 07 12
R You can select the date format by pressing #:
–dd/mm/yy (date/month/year)
–yy/mm/dd
3Enter the current hour and minute. Example: 9:30
09 30
R You can select
pressing 
.
4
a M
N
Note:
RThe date and time may be incorrect after a power failure. In this case, set the date and time again.
Dialling mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1
(middle soft key) #120 2 MbN: Select the desired setting.
3
a M
N
One touch eco mode
When the handset is on the base unit, the base unit transmission power is reduced up to
99.9% if only one handset is registered. Even when the handset is not on the base unit or several handsets are registered, the base unit transmission power in standby mode can be reduced up to 90 % by activating one touch eco mode.
You can turn on/off one touch eco mode by just pressing MR/ECON. The default setting is “Normal”.
–When the one touch eco mode is on: “Low”
is temporarily displayed and 
is shown on the handset display instead of 
.
–When the one touch eco mode is off: “Normal” is temporarily displayed and 
goes off from the handset display.
Note:
RWhen there is another cordless phone nearby and it is in use, the base unit transmission power may not be reduced.
RActivating one touch eco mode reduces the range of the base unit in standby mode.
RIf you set the repeater mode to “On” (page 41):
–One touch eco mode is cancelled.
–“Eco Setup” is not shown in the display menu (page 30).
Display mode
You can select to display either a single item or multiple items on one screen at a time for the following features:
–handset main menu icons in function menu
–menu list, recorded message list*1, phonebook list, caller list, and redial list
*1
–“Multi Items”: Multiple entries/all menu icons are shown on one screen at a time.
–“Single Item”: An entry/a menu icon is
shown on one screen in large characters at a time.
The default setting is “Multi Items”.
Using soft key (Temporarily switching the display mode)
You can temporarily switch the display mode
by pressing 
shown when viewing the lists or selecting menu icons.
Programming the display mode beforehand
1
(middle soft key) #192
16
2012/04/27 20:24:45
