Programming
6Enter a text memo (30 characters max.; page 54). a 
7MbN: Select the desired alarm tone. a
2 times
R You can select “Off” if you prefer not to hear an alarm tone.
R We recommend selecting a different ringer tone from the one used for outside calls.
R To add other entries, repeat from step 3.
8M
N
Note:
RTo stop the alarm, press 
or place the handset on the base unit or charger.
RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
Viewing entries
1
(middle soft key) a 
a 
2To see the entries on the selected date,
press 
.
To see the schedule list, press 
. R You can see detailed information
about the schedule by pressing 
.
Editing an entry
1
(middle soft key) a 
a 
2
a MbN: Select the desired entry.
3
a MbN: “Edit” a 
4Edit the date if necessary. a 
5 Edit the time if necessary. a 
6Edit the text memo if necessary (30 characters max.; page 54). a 
7MbN: Select the desired alarm tone. a
2 times
8M
N
Erasing an entry
Schedule alarm entries are not erased automatically after the schedule alarm sounds. Erase unwanted entries.
1
(middle soft key) a 
a 
2
a MbN: Select the desired entry.
3
a MbN: “Erase” a 
4MbN: “Yes” a 
5 M
N
Erasing all entries
1
(middle soft key) a 
a 
2
a 
3MbN: “Erase All” a 
4 MbN: “Yes” a 
5MbN: “Yes” a 
6 M
N
Baby monitor
This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby’s room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound.
Important:
RYou should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. For example, test its sensitivity. Check the connection if you are diverting the baby monitor to an outside line.
Note:
RBoth the monitored and monitoring handsets must select the same base unit in order to use the baby monitor feature (page 40).
RIf the unit is connected to a PBX system, you cannot set the baby monitor.
37
2012/04/27 20:24:47
