Programming
*14 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*15 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*16 The default setting will be as follows if you select the following regional codes when changing the unit’s region setting (page 36):
“Česká rep.” = “100 msec.” “Slovensko” = “100 msec.”
*17 To prevent other users from joining your conversations with outside callers, turn this feature on.
Special programming
Alarm
An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 5 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time.
Important:
RSet the date and time beforehand (page 15).
1
(middle soft key) #720
2Select an alarm by pressing 1 to 5. a
3MbN: Select the desired alarm option. a
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time. Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
4Proceed with the operation according to your selection in step 3.
n Once:
Enter the desired date and month. a
nWeekly:
MbN: Select the desired day of the
week and press 
. a 
5Set the desired time. a 
6Enter a text memo (30 characters max.; page 54). a 
7MbN: Select the desired alarm tone. a
RWe recommend selecting a different ringer tone from the one used for outside calls.
8MbN: Select the desired snooze setting. a 
9
a M
N
R When the alarm is set, 
is displayed.
Note:
RPress 
to stop the alarm completely.
RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
RPress any dial key or 
to stop the sound but keep the snooze function activated.
RIf you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call.
33
2012/04/27 20:24:46
