Useful Information
Problem
“E0” is displayed.
Cause/solution
RYour phone number is permanently withheld or you have not subscribed to the appropriate service. Contact your service provider/telephone company.
Answering system
Problem
The unit does not record new messages.
I cannot operate the answering system remotely.
Cause/solution
RThe answering system is turned off. Turn it on (page 47).
RThe message memory is full. Erase unwanted messages (page 48).
RThe recording time is set to “Greeting Only”. Change the setting (page 51).
RIf you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit’s number of rings setting or contact your service provider/telephone company (page 50).
RThe remote access code is not set. Set the remote access code (page 50).
RYou are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 50).
RThe answering system is turned off. Turn it on (page 50).
Liquid damage
Problem
Liquid or other form of moisture has entered the handset/base unit.
Caution:
Cause/solution
RDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorised service centre.
RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
61
2012/04/27 20:24:48
