Making/Answering Calls
telephone banking services, etc.).
Press * before entering access numbers which require tone dialling.
Handset equalizer
This feature clarifies the voice of the person you are talking to, producing a more
1Press 
while talking.
2MbN: “Equalizer” a 
3 MbN: Select the desired setting.
4 Press 
to exit.
Note:
RWhen this feature is turned on, 
is displayed while talking.
RDepending on the condition and quality of your telephone line, this feature may emphasise existing line noise. If it becomes difficult to hear, turn this feature off.
RThis feature is not available while using the speakerphone.
Recording a telephone conversation
Available for:
Important:
RBefore recording a conversation, you should inform the other party that the conversation is to be recorded. In case you record without informing the other party, it will cause the infringement of privacy and civil liability.
1Press 
during an outside call.
2 MbN: “Record Call” a 
3 To stop recording, press 
.
Note:
RTo listen to the recorded conversation, see page 48, 49.
Call share
You can join an existing outside call.
To join the conversation, press M
N when the other handset is on an outside call.
Note:
RA 2nd handset cannot join an outside call that is being recorded (page 20).
RTo prevent other users from joining your conversations with outside callers, turn the privacy mode on (page 31).
Key lock
The handset can be locked so that no calls or settings can be made. Incoming calls can be answered, but all other functions are disabled while key lock is on.
To turn key lock on, press 
for about 3 seconds.
R
is displayed.
RTo turn key lock off, press 
for about 3 seconds.
Note:
RCalls to emergency numbers cannot be made until key lock is turned off.
Power back-up operation
When a power failure occurs, the charged handset temporarily supplies power to the base unit (power
Important:
RIf a handset is not placed on the base unit when a power failure occurs, “Base no power Press e” is displayed. After
pressing M
N on the handset, place it on the base unit to start power
20
2012/04/27 20:24:45
